I'm not sure when I set all the camera with the same setting. Only one of the camera's goes to BW, where the other camera remain in colour mode during the day. 4ms exposure 30 gain. what is causing the issue?
What are optimized setting for the camera and blue iris when using these camera's. Do you uses code project setup and camera ? Or is there a recommended solution for night
Night setting
Brightness 57 Contrast 64 Saturation 50 Sharpness 50 Gamma 50
Shutter 13ms gain 68 Exposure 50 2D/3D 45
I'm unsure if I should keep the Hikvision or just replace them with the IPC-T54IR-ZE-S3, currently have both model running. Hikvision DS-2CD2347G2-LU and just go some of these model IPC-T54IR-ZE-S3.ZE-S3, Or move the Hikvision to a different location ?
I'm trying to setup these camera IPC-T54IR-ZE-S3 with BI using Get ONVIF events, under Trigger zones I have selected ONVIF and External. The issue that I'm having is one camera get the Main /Sub stream profiles MediaProfile_Channel1_MainStream...
Yes I'll add additional infrared lighting, getting a few of these Univivi IR Illuminator 90 Degree Wide Angle 850nm 8-LEDs Infrared Light for Security Cameras with Power Adapter,IP67 Waterproof Currently light is ok
I've been reading these are good at seeing licences plates at night IPC-B5442E-Z4E and IPC-B52IR-Z12E. I'm look for something that can see people stealing catalytic converter, most of the time they are riding on bikes or walking up to the vehicle. Would these be good for that type of usage for...
I'm look to replace my current hikvision DS-2CD2347G2-LU with something that offer best low light condition. I was look at this model Dahua T5442T-ZE? or is there something better for low light
i'm running version code project 2.1.11 and have setup under the trigger, but it doesn't get any hits on people or car. Blueiris 5.7.7.3 Not sure what is the issue need some help, did a complete delete and install of code project
09:32:23:Operating System: Windows (Microsoft Windows 11 version...