Search results

  1. ron351

    Hikvision dome built in mic problem Model DS-2CD2542FWD-IS

    I will have to see, not sure if I used Firefox or IE now. But worth a try. I will go to the business Friday and try it with IE and get back with hopefully good news
  2. ron351

    Hikvision dome built in mic problem Model DS-2CD2542FWD-IS

    This DS-2CD2542FWD-IS Hikvision camera is POE with built in MIC. The POE is powered by a POE injector and have a audio problem. Seen other posts saying to enable audio which I do and audio works fine but only a couple minutes then goes silent. I go back to settings and have to change video again...
  3. ron351

    POE pinout add external MIC

    Ok yea it is a shame but it is what it is I suppose. Was worth a try anyway.
  4. ron351

    POE pinout add external MIC

    Ok thanks. The NVR has a MIC in and MIC out but Honeywell claims it is no longer supported so the MIC in didn't get audio. I guess since there is no way to tap into the pins for video which also share audio with cameras having built in MICs then no alternative then to just change the camera with...
  5. ron351

    POE pinout add external MIC

    Guess what I am trying to get at here is this camera shown has a built in Microphone and is a POE camera. The power-Video-Audio is sent through the CAT5 cable RJ45 jack Since my camera does not have a built in MIC and I want to add a MIC away from the camera to pick up better by the cash...
  6. ron351

    POE pinout add external MIC

    No GUI page that I know of. There is a tick box to check for audio but unable to tick it. Driving me crazy and trying to avoid changing out the camera to a camera with built in MIC. Problem is the jobsite is a 1 hour drive away and to keep trying things wastes my time so I was hoping I could get...
  7. ron351

    POE pinout add external MIC

    Ok I thought a POE camera with built in MIC only used a CAT5 RJ45 to send power video and audio from the MIC. I was hoping to add a MIC external to the POE only camera that has no built in MIC. I assume there is no way to do this then using the CAT5 I already have that is already running the POE...
  8. ron351

    POE pinout add external MIC

    marku2 the problem is the RCA jacks on the back of the NVR there are 2 of them 1 is MIC in and the other is MIC out. I ran a power mic to the RCA jack MIC in side and no audio and can't put a check in the checkbox for audio. Even though there are RCA jacks for MIC audio it seems that Honeywell...
  9. ron351

    POE pinout add external MIC

    Isn't a POE camera with built in MIC all run from the RJ45 cable? I thought the cat5 rj45 ran power,video,PTZ,audio over the 1 cat5 wire. and each ran on a pair of wires. What is the sense of the 4578 pins there that don't do nothing. Ideally and just as an example if it worked like this Blue...
  10. ron351

    POE pinout add external MIC

    Ok installed a POE camera system. Honeywell brand and it had a RCAjack in and out so I installed a external mic and it didn't work. Honeywell said the RCA jacks there are no longer used. So, scratching my head and rather thenswitch the camera to a POE camera with built in MIC can the pins not...
View older results
Top Bottom