Recent content by Reimo

Oh, OK Download But I do not recommend to use this old NVR as online system, it has more holes than Swiss cheese in it, while it is so outdated.

You might be locked out after 3-4 unsuccess's, but reboot will reset that counter and You can keep trying. I meant when you have display and mouse connected directly to your NVR.

NVR4208-8P-I is a relatively new model. Your local Dahua representer (I know there are several in Belgium) should be able to help you with no time. Have you tried login with pattern from console. Usually patterns are easy to discover and from there is very easy to reset the whole thing.

You might wanna look to here: ASM.CZ

Hi @kukita Firmware 2.616.0000 indicates that it is indeed a very, very old NVR, Should not be used in network while full on security holes. Anyhow, I think your problem might be this little thing that This NVR supports only old h264 video codec, and Your cameras are most likely set as h265...

Hi Dahua video network security question. I have a task to hide Ip cameras in the network. Currently I have a network where cameras get their IP address from dhcp static list and no other foreign device gets IP address. But still if "tresspasser" connects with static IP of without IP...

Excellent, this is exactly what I need. Appreciated.

Hi Now is my turn to ask advice in a issue, that I have never bounced into before. I need to push custom text string in to "Text Overlay" field in Camera OSD area of Dahua Camera. Lets say this Camera is a HFW3841T-ZAS. I know this is possible, but I do not know, how. Has anyone dealt with...

S sure it does, you just have to do all the other tricks too, just like in good old days with IE.

You guys are overthinking. Edge browser has Internet Explorer mode (see the three dots menu and Reload in Internet Explorer mode). So far works like charm.

I can help you with that, gentlemen. Link

This is not the firmware issue, you have totally too high bitrate combined to all cameras. Try to lower bitrates about 5% and you will see how your problem solves.

I have firmware, that i have marked as for SD6980C-HN, but take it as own risk, compatibility list inside says it is ok. General_SD-Brynhil_Eng_P_V2.213.0000.0.R.20131127 https://www.dropbox.com/s/g4euutcoyldxmut/SD6980C-HN.zip?dl=0

This is a EOL product and has no V4 firmware ever done for it. Sorry. But latest version for that recorder is DH_HCVR5x16-S3_Eng_P_V3.218.0000002.5.R.190301, you seem to have it already.

Latest for that is DH_NVR4XXX-4KS2_MultiLang_V4.001.0000005.1.R.210713