Recent content by phonebooth

If you weren’t using P2P I’d understand why event notifications weren’t visible. Other than that, I’m not sure, sorry.

Are you using P2P with the DMSS app?

Sorry, I’ve moved to Blue Iris and no longer have a Dahua NVR to look at. These settings were in the NVR config, not the cameras web interface. I believe the camera web interface only has a disarming option.

Dahua support has informed me that the illuminator light (white light) cannot be manually turned on/off via API. Custom firmware is required to achieve this.

Try this to activate the alarm light. It will flash 9 times if successful, then stop. /cgi-bin/coaxialControlIO.cgi?action=control&channel=1&info[0].Type=1&info[0].IO=1

I’m Australian so about $81 (thought it was closer to $100).

Yeah. I spent $100 on Blue Iris and didn’t look back. Best CCTV software out there and it puts the Dahua NVR to shame. You’ll get very granular control over your notifications.

Hi everyone I'm on a mission to automate some of the notification/arming aspects of my Dahua camera system. I'm trying to enable/disable a specific IVS rule for Camera 1 (channel 0). I can see in the device config that the specific config line that needs modification is: From...

I've managed to find the setting. The wording isn't the best so this didn't stand out initially. If you set "Event Notifications" under Alarm > Disarming to "Close" it will not alert you while the system is disarmed. However, once you arm the system via DMSS (or the Web UI), it will alert you...

Hi everyone I have installed 4 Dahua TIOC 8MP turret cameras around the perimeter of my house. The cameras are connected directly to an 8ch Dahua NVR Lite. I'm seeking advice on how to best handle notifications from the cameras. At present, I have both SMD and IVS enabled and they present an...