For anyone else having the same issue - i was putting in the camera ip address not the nvr ip address... idiot...
example: rtsp:/USER:PASSWORD@192.168.100.150(NVR'S IP ADDRESS NOT THE CAMERAS):554/Streaming/Channels/101 (3202 - would be camera 32 on sub stream)
Hi mate
I’ve already set the virtual host and manual settings.
i don’t have access the the network settings as this is managed via a security firm.
with virtual hosting on I was able to connect to the cameras and add a new user. RTSP still doesn’t work. Only the ip cameras on the network...
Hi all,
I can connect to network cameras RTSP feed that are not directly plugged into the POE ports on the back of the NVR. all the cameras plugged in to the NVR i cant access the RSTP feed.
also for some reason the mainstream doesn't need a password but the sub stream does.
i turned on...
Hi all
Anybody been using the new app, I saw event playback in playback area, nothing showing up but I may not have my NVR set up correctly.
Im guessing select the purple in capture menu?
Thanks for the replies, think that’s the only way, add a switch to the cable going out to the outbuilding and then add and AP unit onto that.
I know you can get AP units with wired ports but not the other way around ♂️
Hi all
I can’t seem to find what I need or I’m messing up the terminology used
- I have a virgin media route
- an exist hardwired Ethernet cable to out buildings
- need to split this cable with a 4 port switch ( hardwired cameras)
- also need it to repeat the existing WiFi - which is too far...
So I’ve been reading about the Hikvision doorbell and how it doesn’t have a chime etc
would this work
- install Hikvision doorbell
- find on Hikvision NVR and add
- set doorbell alarm input to trigger NVR output (probably doesn’t have this option - motion maybe)
- wire in a fibaro FGBS-001
-...