Eureka! it is fixed. Camera was giving a language mismatch error. So i used the hiktools to change the language to 1 in whoslooking downgrader firmware. It loaded instantly without issues. Big thanks to snikinl for pointing me to console access and using hiktools to change the language. An...
I now have console access. So that's progress. commands like cat are not working. But I can use a predefined set of commands like dmesg. What should I be looking at?
Thanks Snikinl, I ordered the items I need and will try to connect to the camera via serial to see what's going on. I'll update the results here when the items have arrived.
Hi, I tried both the 4 line version as the previous one. Both times the camera started responding to 192.168.1.64, the moment the transfer was complete. But never a "System update complete". I'll try to see if telnet is still working when in minimal boot status.
Edit:
When in min recovery I...
Been playing around with this for a while now and seemingly unable to get it fixed. I got a new Hikvision cam type DS-2CD2032F-I from AE. Label on camera shows: v5.3.0_150513 (with Q/BFW 006-2015) and right top corner shows 10/2015. Since it was not registering well on EZVIZ7 i decided to...
Okay, I finally managed to fix the issues with WhosLooking 3.0.13 firmware and procedure. The TFTP error was happening cause I had my local PC set to 192.168.0.128 instead of 192.0.0.128. After the upgrade my NVR now properly shows DS7104N-SN. Adding the camera's using HIKVISION protocol is also...
When I try to update using TFTP it gives me the error:
"Unexpected request 16754 from peer"
"Returning EBADOP to Peer"
I tried adding my Hikvision bullet cams to the NVR, but everytime I add them I get Network Abnormal and the NVR reboots. :(
Edit: The error is shown in TFTPD32 log...
Thank you Oleglevsha,
I opened a dispute to get some of the money back as compensation for this hacked version.
Already payed 28.5 $ on tax and customs, so sending back for full refund is not really possible without me losing money on it.
Regards,
Mark
Hello,
I just started with Hikvision and ordered a DS-7104N-SN and two hikvision camera's. After installing the NVR I noticed the Device Information showing model DS-7116N-SN. Even the serial number is showing DS-7116N-SN in the name. The box shows DS-7104N-SN.
Is it possible to upgrade this...