Recent content by Narcissus

I know it's a bit pricey, I have my NVR plugged into an UPS; the UPS in turn is plugged into an ECOFLOW Delta 2 Solar Generator. If the power goes out the Ecoflow trips in after about 2ms lag. During those 2 milliseconds the UPS is on and the NVR hasn't noticed the outage.

Thanks. Already done.

Just read the "Understanding Decoding Capability" PDF, consequently I learnt I was probably exceeding the decoding capability of my NVR. As I would see video lag and/or video-freezing quiet frequently. Cheers.

Thanks again.

OK, because it was making zero sense to me.

Details of the security camera-NVR setup: NVR (Dahua) = NVR5208/16-8P-4KS2E with six (6) (Dahua) cameras plugged in: Ports 1,2,4 and 5 = an IPC-HDW5831R-ZE (8MP WDR IR Eyeball Network Camera) Ports 3 and 6 = an IPC-EBW81230 (12MP Panoramic Network IR Fisheye Camera). My question is regarding...

My recent foray into update-it-stan cured me of my OCD. Good luck to the OP.

Just to close the loop on this: The IP address belongs to my Synology NAS.

Tangential works.

Some would say of #5 "last but not the least".

AMEN!

Why is H.265 bad compared to H.264.H?

I have 3 Nest cameras. I'm baffled the NVR would pick those/one up. I'll do a IP address search on my router. Thanks again.

FIXED!!!! Did a factory reset according to Bigredfish's instructions.

Thank you to all that spent time to puzzle out this problem over part of your weekend. I will respond to those individually so that they get a push notification saying same.