Recent content by moped

  1. M

    Pulling (unsupported) video streams into your NVR with RTSP

    I'm using a DS-7608NI-E2/8P. The protocol config looks correct. The only notable difference is that I used an absolute path when configuring ("/stream1" instead of just "stream1"). You can test RTSP functionality locally on the device. If you have a working channel, add a custom protocol...
  2. M

    Pulling (unsupported) video streams into your NVR with RTSP

    Can you post the config you are using for the custom protocol on the DVR side?
  3. M

    Pulling (unsupported) video streams into your NVR with RTSP

    I would suggest testing locally using VLC. If it works, then it's probably a firewall issue (windows firewall or whatever AV you are using). If it doesn't work, you'll have to look at rtsp-server or ffmpeg as potential culprits.
  4. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    Try suggestions from this reply: Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial Just to confirm - you didn't load the wrong firmware on this or something right? Thanks, Rob
  5. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    Similar but not the same. Most microcontrollers these days have built in UARTs (universally asynchronous receiver/transmitter) that can be used to receive and transmit data serially. UARTs transmit one bit at a time at a specified data rate (i.e. 9600bps, 115200bps, etc.). This method of serial...
  6. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    It’s not rs232 (computer) serial. You will need to get a serial UART USB adapter.
  7. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    try pressing tab a couple of times and see if there is any output.. if that doesn't work, type 'ls' and press enter and see if there is any output from that.
  8. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    It looks like you've dropped to a busybox shell, note the onscreen instruction: "Enter 'help' for a list of davinci system commands" Doing this will list all commands... HKVS # help ? - alias for 'help' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory cmp -...
  9. M

    Hikvision - Surge damaged POE Repair

    I usually break down and do component level repair/troubleshooting when I can't buy a replacement part/board or the overall cost for the item or replacement part is up there. I would rather repair if I can, replace if I have to (or it makes more fiscal sense). My neighbors house got hit by...
  10. M

    Pulling (unsupported) video streams into your NVR with RTSP

    I didn't want to have to setup nginix (really wanted to avoid having to play with or build up config files), plus I'm not sure that my NVR supports RTMP. Path of least resistance I guess - zero configuration on the server (just run a script) + figuring out proper ffmpeg switches. I will go...
  11. M

    Hikvision DS-7108N-SN/P NVR Stuck at Boot/Splash Screen Need to Extract Footage

    I'm a bit late to the party on this one, but did you by chance attempt to install ivms 4200 + the storage server option? I remember from playing around with the storage server that it wanted an entire drive to use (vs a folder/designated disk space) and it wanted to format it (assuming with...
  12. M

    Pulling (unsupported) video streams into your NVR with RTSP

    Before I purchased a hardware based NVR, I was using some enterprise NVR software and an older MJPEG camera as well as a 720p USB webcam. MJPEG = Motion JPEG. MJPEG was pretty common on older cameras / cloud cameras / consumer items. My Hik NVR only supports RTSP streams though - so these...
  13. M

    Hikvision 7200 dvr

    I'll assume by homepage, you mean the main viewing screen (where you see, or would see camera feeds) and not the Hikvision splashscreen/logo. Beeps = fault of some sort usually. IP address conflict, hdd failure, full, or not formatted/initialized. These are the default beeps I believe, but...
  14. M

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    Primarily using Axis right now (some units here are strictly military work - no CN cameras or IoT devices there, airgapped networks, etc). Honeywell is used for access control and HVAC controls, primarily. Honeywell also rebrands some Dahua + other manuf's cams. I like to use Honeywell as a...
  15. M

    Hik 8 Port POE NVR And LG LND7201R Cameras Mobile App not working

    I'm using a media server and transcoding an older MJPEG camera as well as a feed from a USB webcam. This provides h264/RTSP feeds for my Hikvision NVR (two camera feeds are setup this way). Not a lot different than using a 3rd party camera. Codec matches what the Hik cameras use. Results...
Top