Recent content by MarcusPointeIT

Hey guys, I'm new to all this so please be gentle. I have 18 ip, poe amcrest cameras running into a unifi 48 port switch. That runs to another switch, then to an aggregate, then to the main udm several buildings away all via fiber. I inherited this setup so I'm working with what I have. From...

1080, 15fps, 3-40960 bit rate. They are all POE switches. I will run this test and see what I come up with. TY

1. I can freely talk with the previous tech guy who, sadly, knows as much as me. He purchased these devices, thinking he could figure it out and left as he was doing just that. So he can't help. 2. Agreed. 3. Everything is on ONVIF 4. Bandwidth was my first thought as well. I brought...

Yes. I have a bank of cameras, set to the same settings as the rest, that seem to work consistently (few hicups here and there), but there are four that never stop malfunctioning. I know they have power and have data. I can see that at the switch. Two say "Failed to get Stream" and the others...

I recently had the same thought so I brought everything down to the exact recommended specs and it hasn't improved, sadly.

HIKvision NVR DS-9664ni-i8 x2 25 Amcrest 8 meg POE 4k cameras mostly turret and a few bullet cameras connected via cat6 to a ubiquity 24 switch that is run via fiber to another switch, which is then plugged into our NVR. We figured out how to assign ip addresses to the camera and get them to...

1. I am the temporary replacement tech guy 2. The system is running, but consistently drops cameras, disconnects cameras, and refuses display cameras, shows no link. The software/browser interface will only display all the cameras or one, no in between. I cannot set presets either. 3. I have...

I just took a position at a large church. The previous tech guy purchased $5k worth of HIKvision NVR's and 35 Amcrest poe ip 4k cameras. He figured out how to configure the IP's for the camera, make the NVR see the cameras, and then he left. The admin want to know why the cameras are not...