Recent content by lovert

That one was brandless, I bought it about 3 years ago. It was advertised as a 30x but it is possible that it's 20x times optical. It's a bit of a lucky dip finding a good one. I then bought 2 more that had brand names for $299 (Vimal) and they are not as good as my original one as they...

Problem for me too because mine is out in a field and runs off solar and battery. With the previous Reolink I had in that place I could turn off the IR to save battery and just have it trigger the IR on when another camera elsewhere alerted. Mine also does not ever return to the same PTZ...

Beautiful !!!! btw with mine when the CBR is set after reset the bit rate does not increase to the value set. First you must set to VBR and then back to CBR. To set to VBR change the BitRateControlSelect=1 to BitRateControlSelect=0 eg VBR Set curl -s --user 'admin:pass'...

I didn't notice it but will check again. I was hoping that the curl -u admin would work. btw One of the problems when these cameras restart is the the admin password goes to blank - not good.

Yeah, I've played around with Burp Suite and come up with, curl -u admin http://172.16.20.22/browse/settings/videoAudioSet.asp?_ie6need=on&PFR_=50&MVR_=0&MHR_=0&BLC_=1&WDR_=1&WDR_HFR_MODE_=0&Payload=1&resolution=33&framerate=15&IPRate=15&BitRateControlSelect=1&BitRate=6000000 But - it dosn't...

Is there anyway we could fire a curl command to set the parameters of the video information ? We could then setup a scheduled batch job to run the command every 15 minutes to ensure that the video setting don't stay defaulted when it restarts. Mine often, but no always, restarts at 1am.

I have this camera too. Initially I was really happy because the optical quality is good for a cheap PTZ. I setup in Blue Iris but I have the issue with loosing the image quality settings on reboot. Also when you change the CBR bitrate back to the higher rate that you want, it does NOT work...