Recent content by ismurdegus

  1. I

    Hikvision NVR DS-7600 and HIK- Connect

    But this is for activate a camera... I need enable the HIK-Connect and link to the phone app. I don't need activate a camera. Thanks
  2. I

    Hikvision NVR DS-7600 and HIK- Connect

    Hi guys Hope you all doing well... I just finish to install a DS-7600 16ch with 10 x 8Mp camera in a a small warehouse. Everything work perfect on the local network but I am going crazy trying to setup the HIK-Connect on the customer phone. The NVR has the last firmware installed. I think...
  3. I

    Cameras via Powerline

    Yes I notice but because I have 4 to connect direct to the NVR and 4 on the LAN, I was not sure if I need modify the IP address range of the NVR switch so that will be on the same range of the LAN
  4. I

    Cameras via Powerline

    I have another questions.... Local Lan is on 192.168.1.0/24 The cameras connected direct on the NVR need have IP that is same of local LAN? Or can be any IP range? Thanks
  5. I

    Network Switch connect to the NVR integrate switch

    Ok got it! Maybe I need a new switch with Vlans
  6. I

    Network Switch connect to the NVR integrate switch

    Thanks wittaj, Because the remote 4 or the 8 cameras are not accessible I need use an external switch. My question was if the POE switch at the back of the NVR is like "smart" and check if need inject the 48v or not. Because if was "smart", I can connect the cable that come direct form the...
  7. I

    Network Switch connect to the NVR integrate switch

    I was thinking to avoid and buy another switch. I like the idea to have all the cameras on a different network of my home one. I guess I need buy another switch then
  8. I

    Network Switch connect to the NVR integrate switch

    Hi guys, I have an 8 channel Hikvision NVR were only 4 port are use for the local cameras. Another 4 cameras are connect on a standalone switch... Can I connect one port to the NVR switch direct to the standalone switch so all the cameras are on the same network? Thanks
  9. I

    Cameras via Powerline

    Appreciate your help!
  10. I

    Cameras via Powerline

    OK I will follow your suggestion. So put the cameras at 2MP, 15Fps and 1500bitrate...
  11. I

    Cameras via Powerline

    Ok I will try with another switch then. To be precise the camera in the parking area are 4x 2cd2386g2 and I have 4 x 4MP cameras installed in the house. The 4 in the house are connected on the direct switch at the back of the NVR. So I need put all the camera at 1080p 30fps for not overload the...
  12. I

    Cameras via Powerline

    Hi and thanks for your replay, The power line is a TP-Link AV2000 The NVR is the DS-7608NI...should support 8 channel at 4K I was not able to setup the cameras yet , but I will follow your suggestion. The LAN has an old TP-Link 16port gigabit switch where all the rest of the house is connected...
  13. I

    Cameras via Powerline

    Hi guys Quick question about an installation I did at my unit last week. I leave on level 3 and I installed 4 x Hikvision 4k camera inside the parking area underground. I connect all the cameras to a 5 port POE switch (4 x POE + 1 LAN) and then to a Powerline adapter connected on my power...
  14. I

    Random fail web access on Dahua DHI-NVR4104HS-4KS2

    Hey guys I have a DHI-NVR4104HS-4KS2 with the firmware version: V4.001.0000000.1, Build Date: 2020-03-19 The NVR has the issue that randomly the access via web interface in not working. I can see the network LED flashing at the back but you can access to it. I can also PING the NVR but that is...
  15. I

    PTZ controls no working under NVR

    The auto-update on the NVR was working for me. Was the one on the camera that didn't. I update the camera firmwase to the last one 2.8....... but still the PTZ control via the NVR is not working. Every time I try it, the message : Please set the PTZ protocol of current channel" come up on the...
See more
Top Bottom