Search results

But this is for activate a camera... I need enable the HIK-Connect and link to the phone app. I don't need activate a camera. Thanks

Hi guys Hope you all doing well... I just finish to install a DS-7600 16ch with 10 x 8Mp camera in a a small warehouse. Everything work perfect on the local network but I am going crazy trying to setup the HIK-Connect on the customer phone. The NVR has the last firmware installed. I think...

Yes I notice but because I have 4 to connect direct to the NVR and 4 on the LAN, I was not sure if I need modify the IP address range of the NVR switch so that will be on the same range of the LAN

I have another questions.... Local Lan is on 192.168.1.0/24 The cameras connected direct on the NVR need have IP that is same of local LAN? Or can be any IP range? Thanks

Ok got it! Maybe I need a new switch with Vlans

Thanks wittaj, Because the remote 4 or the 8 cameras are not accessible I need use an external switch. My question was if the POE switch at the back of the NVR is like "smart" and check if need inject the 48v or not. Because if was "smart", I can connect the cable that come direct form the...

I was thinking to avoid and buy another switch. I like the idea to have all the cameras on a different network of my home one. I guess I need buy another switch then

Hi guys, I have an 8 channel Hikvision NVR were only 4 port are use for the local cameras. Another 4 cameras are connect on a standalone switch... Can I connect one port to the NVR switch direct to the standalone switch so all the cameras are on the same network? Thanks

Appreciate your help!

OK I will follow your suggestion. So put the cameras at 2MP, 15Fps and 1500bitrate...

Ok I will try with another switch then. To be precise the camera in the parking area are 4x 2cd2386g2 and I have 4 x 4MP cameras installed in the house. The 4 in the house are connected on the direct switch at the back of the NVR. So I need put all the camera at 1080p 30fps for not overload the...

Hi and thanks for your replay, The power line is a TP-Link AV2000 The NVR is the DS-7608NI...should support 8 channel at 4K I was not able to setup the cameras yet , but I will follow your suggestion. The LAN has an old TP-Link 16port gigabit switch where all the rest of the house is connected...

Hi guys Quick question about an installation I did at my unit last week. I leave on level 3 and I installed 4 x Hikvision 4k camera inside the parking area underground. I connect all the cameras to a 5 port POE switch (4 x POE + 1 LAN) and then to a Powerline adapter connected on my power...

Hey guys I have a DHI-NVR4104HS-4KS2 with the firmware version: V4.001.0000000.1, Build Date: 2020-03-19 The NVR has the issue that randomly the access via web interface in not working. I can see the network LED flashing at the back but you can access to it. I can also PING the NVR but that is...

The auto-update on the NVR was working for me. Was the one on the camera that didn't. I update the camera firmwase to the last one 2.8....... but still the PTZ control via the NVR is not working. Every time I try it, the message : Please set the PTZ protocol of current channel" come up on the...

My NVR version is : V4.000.0000001.5 and my DH-SD22404T-GN has firmware: 2.623.0000000.7 If I am going on the camera interface and check online firmware update, the system say that the firmware is the last one.

So, today I did an update of the NVR firmware.... Right now if I select the PTZ camera and try to move with the control buttons, a message show up : PLEASE SET PTZ PROTOCOL OF CURRENT CHANNEL. How I can do it? I can't find anywhere.... Thanks

No one had similar issues before?

Thanks Tony The NVR is : DHI-NVR4108HS-4KS2 Long time ago, circa 3 years ago, I had a 2MP version that was working just fine. 2 months ago, I notice that the PTZ control was not responding, also the IVS was not working....so I purchase a new one but 4MP. All connected yesterday but realize...

Hi guys I need some help with my Dahua PTZ DH-SD22404T-GN.... If I access the camera direct via IP address, everything work perfect; including the PTZ controls. If I try to control the camera, using the PTZ buttons on my 8-ch Dahua NVR, nothing work! The camera was add to the NVR via the auto...