Recent content by integlikewhoa

  1. I

    Blue Iris Tools - Weather Overlay, Watchdog & more!

    Have you checked their website? Home - Blue Iris Software Right in the top of the page is a download button. But if you purchased back in 2021 I'm not sure what version you have or if you can use the latest version with the old key.
  2. I

    Recording Starts Late

    I have two different systems and after some recent updates my playback recordings are min or so off. Alerts and images are fine but when played back its delayed way after the alert image. So I use AI after it sees a vehicle leaving my gate. Alert list on the left shows a still image with the...
  3. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    What's the recommend settings for blueiris? I'm having problems with picture quality compared to my older 4mp cameras. Attached is a few pics of the settings and one camera that isn't as clear is the new 4k vs. The older camera the image is clearer.
  4. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    Thanks for getting back to me, I tried that with no luck. I ended up sending it back to Amazon for replacement. Other 9 were no issue. Still waiting for replacement to come and hopefully this last one will install like the others did without a problem.
  5. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    I disabled the POE on the port for the camera, ran the ping and got a timed out. Turned the POE back on and now I get ping again on 220. Nothing else is on 220 and nothing is on 108 that I would like to reset this thing back to default and start from scratch.
  6. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    I was using chrome like the other 9 cameras I installed but I did just try edge with the same issue. I think unless there is some way to ssh in a reset or some other trick I'm just gonna send this one back to Amazon and get a replacement. The other 9 and up and working just fine.
  7. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    I can also get putty to connect to the camera on 192.168.1.220 SSH port 22 but I don't have a password for it and I know I never turned on SSH in the GUI.
  8. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    Which Also means resetting it isn't working cuz it should go back to 108. I don't have it fixed ip in the router yet and 108 is not currently being used.
  9. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    I'm getting a Ping back from it on 192.168.1.220 (Which is what I set the static to when I first got in). But I can't get a GUI on 220
  10. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    No I currently have changed all the ips away from 108. That was probley what started this issue as I was installing several cameras at a time. But I would login and set them to a different static so i could point them. Later I went into my router (unifi USG) and sent them on the router side and...
  11. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    Yes its on POE power and I opened the door and held the little button in.
  12. I

    Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret

    What's the proper way to reset these camera's. I tried holding down the reset button for atleast 30sec and still no luck. I have one of Ten I cant access the GUI on. I can see it show up on my network 192.168.1.108 but going to that doesn't find it and pinging it also doesnt ping back. Using the...
  13. I

    Last two versions get stuck on triggering

    Ok I reported and got this email back.
  14. I

    Last two versions get stuck on triggering

    I haven't but downgrading fixed my problem.
  15. I

    Last two versions get stuck on triggering

    Thank I have done this and so far no issues. Hopefully it will get fixed soon.
See more
Top Bottom