Recent content by HelpMe3

I do not have a internal sd card i think, everything is send to my nvr, I just resetted it another time, lets hope this fixes it for good.

I have a LGS308P 8-Port Gigabit PoE+ Smart Switch from linksys, when I log in I get the following power metrics: Power Mode: Port Limit Class Limit Nominal Power: 72 W Consumed Power: 15 W Available Power: 57 W...

I have 5 dahua cams, all connected to the same POE switch and am having troubles with one cam that keeps going offline every week or so, all the other 4 (same) work well. device type: IPC-HDBW4300E-AS software version: 2.420.0009.0.R, build : 2015-11-06 WEB Version3.2.1.305503 ONVIF...

So will there not be any beter image quality or so when upgrading a 2015 firmware that is 5 years old to a newer one ?

bumb

Hi So I have 5 dahua ip cams, however these all run on old software versions of 2015-11-06. I would like to update them, however searching the dahua wiki / firmware finder tool I get 0 results for my cam. device type: IPC-HDBW4300E-AS software version: 2.420.0009.0.R, build : 2015-11-06 WEB...

Yea I i thought so , I already tried using other port on my switch but with no succes :/ . Unmounting the whole cam does seem like a lot of work , is there however a possibility of directly connecting the cam instead to the switch to a lan poe switch that I use on my routers , which has 1 input...

Do you think the cable is at fault ? because it still gets power through it ?

Hi I have 5 dahua IPC-HDBW4300E-AS type cams, which all worked fine until one didn't give a live feed anymore. I did get this sometimes with other cams so just resetting my switch or nvr worked. However this time it still wouldn't come back online. I tried searching it using nmap, I found...

Hi Is there any app on the lg content store that has the ability to let me watch the cams ? I have 5 cams connected to a dahua nvr and would like to watch them on my tv which is connected via wifi. thx

thx for the help, I resetted the cams bith the reset buttom and reconfigered them and they work now.

ok, So the cam that does work, I tried connecting to it using its ip adres and this has admin/admin as password, however the ones that do not work and thus have the wrong credentials the admin/admin does not work and I do not know these passwords , do I have to reset them physically ?

hi, thx for the replys, I have done a factory reset of the nvr so I now know the admin password, however when I try to configure the cams using the default password "admin" only one works, the same one as before and others are wrong password and then get locked up. So does this mean the cams...

Hi Because one of my cams was never installed properly I (as a cs strudent) wanted to fix it myself. We have 5 dalhua cams and a dalhua nvr with a 4 tb hdd. Because only 4 ever showed up and the 5the one never was installed propperly I decided to dig around a bit. I we were only given a user...