Recent content by gto-guy

Thanks teaf. Ya the cameras they have are all coax and a little older but the old dvr was running them that high fps (until it decided to cook itself). I have a call into geovision about thier cards. From the way i read the spec sheet for the gv-1240b cards, i think the card is offloarding...

I looked at the dvr spec sheet and it says it only goes up to 30 fps. Per an FBI request, the customer needs 120 fps min (at D1 resoution) for the cameras. It deals with the way the fbi van stich partial frames together to get full resolutions pictures.

I need some help looking for a DVR. I got pulled into this project on short notice. I need to replace a failed DVR. It currently runs 16 analog cameras running 4CIF at 200 IPS (or 120 FPS) recording from my understanding. When looking for a replacement DVR, almost everything i am finding is...

sorry, didn't include the part that I couldn't open BI due to it saying it was unlicensed and demo expired.... reg backup and restore worked though on a brand new install

nm, BI finally responded to the original ticket. if anyone in the future need to know they config if kept in the registry at HKLM\Software\Perspective Software

I have emailed BI about this a week ago and still haven't gotten a response (even though my maintenance is current which is discouraging). I need to wipe the C drive on my BI host and completely re-install windows due to an issue with NIC's after win10 updated to 1809. I have the BI app...

right but usually they will still use a lot of the base code, features, etc. I know axis does (and is who I use professionally the most). just wanting to keep difference to a min

no, but I just got a bunch of 5321's and would like to get everything up the same (or as closest) build as possible

Andy, is there any newer English firmware for these?

I want to build 2 small standalone terminals to use with BI in my house. I want to be able to mount a monitor someplace, velco a small pc to it, and it would just display the live camera feed. I have 2 spare 22 monitors and i want to display 9 to 12 cameras. The pcs would sit on the same...

thanks. I used this box, only got 1 nights notice they were going to stand up the wall. RACO 4 in. Octagon Box, 1-1/2 in. Deep with 1/2 in. KO's and TS Bracket (12-Pack)-161SP - The Home Depot pic shows it when that wall was still on the ground

Thx. Any sugestion on what to use? Want to mount it on a flat plate and seal the cable access hole (gromet maybe?)

On my garage eyebrow i have 2 boxes put in for camera mounts. They are standard ceiling light boxes. What is the best way to mount the starlight cams to them? Is there a mount kit or do i need to fab my own kit for it?

I am using the gskill I linked above. I went and got 2 more cards today. 1 is a Samsung evo 64 gb and the other is the store brand microcenter (if you don't know what microcenter is, it is like a frys). pulled 1 cam down, put in the microcenter card and it worked with the .640 firmware...

ya, that didn't do anything. this is the card I have in both: G.Skill 64GB microSDXC UHS-I/U1 Class 10 Memory Card without Adapter (FF-TSDXC64GN-U1) - Newegg.com I can pull the card and it works in my phone last time I tried. any other ideas on how the get the cards to work?