Recent content by grimm

Ah I get you now. Yes it's the two 4431s that have the issue

I thought the same and it was the first thing I tested but issue still persists with dst disabled on the cams.

all of them. i set the two cams that were off by an hour to timezone gmt+1 and they seem to be showing correct time since. ill do network capture over the weekend to figure whats causing them to change time.

i have these set up in bridge mode so they are plugged into nvr but i have access to the cams directly from my lan also

First off thanks for all the replies. i tested with ntp turn on and get the same result. the time date format is different on some cams as it has different firmware. The format year-month-day is the same as yyyy-mm-dd. I tired this and get the same result. I dont see an option on the cams...

Hey, I have 4 dahua cams and a dahua NVR. Any time i check the cams i notice the times are different between cameras and time is off by an hour on 2. Currently it is 7.50pm in ireland yet 2 of my cameras show correct time and 2 show incorrect time. If i go to settings on the camera and do...

Thanks for the reply. I got the IVS working by accessing the camera directly and they are now sending alerts to the NVR and pushing them to gDMSS so no need to change firmware. Its a pain not being able to manage them from the NVR but at least its a one time task. I actually need to purchase...

Thanks for the response. Why is it advised to do it on the camera? I thought the whole purpose of the NVR was that it manages the cameras, the NVR are just storage if thats the case. im really regretting buying the NVR now as i already had storage to record the data to but assumed with an NVR...

Hey, This is my first post. I was using zone minder for years but recently gave up on it as it was just too awkward to use and maintain. I purchased a Dahua NVR NVR4108-8P-4KS2/L as all my cameras are Dahua. After connecting them up and going about setting them up things like trip wires I...