Recent content by Foneman1

  1. F

    Solved: Dahua N41bk22 not showing up on config tool or router, even after physically resetting camera

    It was a brand new (old stock) camera, and the NVR was being stupid and saying the username/password was invalid (it wasn't) The other identical camera was picked up by the NVR immediately, and provisioned. I ended up resetting the entire NVR, and using a 3rd identical camera. It's all working...
  2. F

    Solved: Dahua N41bk22 not showing up on config tool or router, even after physically resetting camera

    PC was on 192.168.0.x. Sounds like it won't work with different subnet settings. I've used other config tools for IOT devices that do work across subnets, so didn't know about Dahua tools
  3. F

    Solved: Dahua N41bk22 not showing up on config tool or router, even after physically resetting camera

    Ok, solved. I went and disabled wifi on the laptop, and set ethernet to static IP, and assigned a range in the subnet of the cam, and it found the camera. I don't mess with static IP's much, so that's what had me lost.
  4. F

    Solved: Dahua N41bk22 not showing up on config tool or router, even after physically resetting camera

    I have 3 brand new N41BK22 cams, and installed 2 onto my existing Dahua NVR, one cam was replacing an existing 720P cam, and the other was going on an unused channel. The first cam I installed was picked up by the NVR immediately, but the other just showed "invalid" username password on the...
  5. F

    Can't back up footage to USB on Dahua NVR

    Didn't think of that, but will use that method. Thanks
  6. F

    Can't back up footage to USB on Dahua NVR

    I'm trying to back up about a minute of footage to an external USB drive (4GB), and it just says "the backup error occurred". If that isn't a fake error just to frustrate someone, I don't know what is. I've selected the USB drive in the backup utility, formatted it, made a folder, selected...
See more
Top Bottom