Recent content by eckhart

  1. E

    Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera.

    The AUTO and MANUAL buttons he is showing in his post are for the timing (LED ON). There are separate AUTO and MANUAL buttons for brightness (LED brightness adjustment).
  2. E

    Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera.

    The Timing button is not necessary with AUTO checked. Per page 52 of the manual, "Auto: The LED will be turned on according to the environment illumination."
  3. E

    Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera.

    In your settings it looks like you have checked "Flashing Alarm". Perhaps that is triggering your flashing?
  4. E

    Add Cameras with Web Interface?

    Thanks so much!
  5. E

    Add Cameras with Web Interface?

    Hikvision DS-7608NI-K2/8P NVR. Is one required to use the HDMI/Monitor setup to add cameras on the NVR? My location is very inconvenient in a closet and I have accessed the NVR via its IP address over my network, but I do not see any configuration menu for adding cameras. If I just plug in a...
  6. E

    Hik NVR Questions

    I just received from Andy his NVR7608-8P-4K2 (Hikvision DS-7608NI-K2/8P) and installed 2 4TB WD purple drives for continual recording. I have had Hik cameras for a number of years (recording individually with Sd cards and remote access via DDNS), but this is my first foray into the NVR world...
  7. E

    Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera.

    I used flexible plastic conduit 1/2 inch
  8. E

    Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera.

    If yours is like mine, you use the 4 holes in the junction box and the 4 holes in the camera bracket. You have to loosen the set screw which holds the bracket to the camera in order to separate the camera from its bracket. Then, mount the bracket to the junction box with 4 machine screws and...
  9. E

    IPC-T2347G-LU Color-VU camera will not install on DS-7616NI-I2 NVR

    I thought the audio was not working on my camera, but realized that the volume was muted by default in the Live View and Playback. Now to figure out how to change the default...
  10. E

    IPC-T2347G-LU Color-VU camera will not install on DS-7616NI-I2 NVR

  11. E

    Audible Alarm Sounds With SD card Inserted

    Micro SD. I am using SanDisk Ultra 64 GB microSDHC /microSDXC Micro SD UHS-I Card UP TO 48mb/s...$17.58 on Amazon. Works fine.
  12. E

    Audible Alarm Sounds With SD card Inserted

    If anyone else has had this problem, I have stumbled upon the solution. The ENABLE RECORD SCHEDULE box needs to be unticked in the Record Schedule tab before the SD Card is recognized by the camera under storage. The alarm blares until you click the FORMAT button and then all seems to be OK. No...
  13. E

    Audible Alarm Sounds With SD card Inserted

    I have 2 new DS-2CD2432F-IW cube cameras which I have set up on my network. I have another of the same camera with 5.2.5 firmware which is set up and has worked fine with a 64GB card for a year or so. My problem with the new cameras is that when I install a SanDisk Ultra 64GB card, the audible...
  14. E

    DS-2CD2132F-IS not recognizing local mircoSD card

    I, too, have this setup and am using SanDisk 64 cards in my 3 cameras (64 Gb is the upper limit for the 5.2.5 firmware). They all work great. I would add that you should feel a slight click when the card is inserted correctly. The first one I did was not recognized, and it was because I hadn't...
  15. E

    Seeking Confirmed NAS Configuration

    4 cameras using the cameras' built-in motion detection to record to the NAS. Would only need 1-2TB of storage. Thanks
See more
Top Bottom