Recent content by cdtek101

  1. C

    Hikvision DS-2CD2032-I

    Went with DS-2CD2032F-I 3MP / 4mm http://www.amazon.com/Hikvision-DS-2CD2032F-I-weather-Security-Network/dp/B015TDBBIM?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 Thankfully it was Mfg 04/2016 with the most recent firmware installed. It was in the red & white box (US version)...
  2. C

    New Computer or upgrade mother board ??

    Good point....Just had a idea but I am no tech, in blue iris motion detect, that eats more cpu..right? Can the camera be set to detect motion and trigger blue iris to record ? ...late night crazy idea ..Lol
  3. C

    New Computer or upgrade mother board ??

    What upgrades can I do to help with mycpu usage .?? I started with 4 cameras,..now up to 11... Cpu spikes over 65% at times on Blue Iris. Whats a better processor ? Amd A4 series or Intel 4 generation core I7 My current is computer is Acer XC-605 Intel Dual core I3-4130 3.40 GHz Attached...
  4. C

    DS-2CD2032F-I Reset ??

    Got it Thank you very much.... Las Vegas Bill is out....Lol
  5. C

    DS-2CD2032F-I Reset ??

    Ok I found the reset button under a plate I had to remove, got it back to factory default..Thank you But when you say don't change ports to leave default....In all my foscams i have changed the http port from 80 to 81xx ..to get away from port 80, always heard not good to leave on port...
  6. C

    DS-2CD2032F-I Reset ??

    Hikvision DS-2CD2032F-I Was all good logging in on web browser on new static ip and could view in blue iris... except I noticed I had Http port on 80 and Port on 8111 I tried swapping and It kept saying port conflict when I tried change around. In Hikvision web browser log in screen I reset...
  7. C

    Port forward rules

    Ahhhh Ha...figured it out....don't even need port forward since I have no need to log into each camera from outside my LAN....I can see all cams outside through Blue Iris web server... Thanks..SyconsciousAu
  8. C

    Foscam camera port

    Using Foscam IP Cam tool/search under network config It asks for a port number or has default 88 My Blue iris web server is on 8100 I changed two cameras to port 80 to test and it works I can see them outside network via blue iris web server. Can all my cams be on port 8105 for example...
  9. C

    Port forward rules

    Ok so if I understand..... If I don't need to assign a port forward for each camera. But what port do I input in camera when it says port ? In blue iris I took out the port #, i can see the camera inside and outside network... but the camera ip in blue iris defaults to port 80 in...
  10. C

    Port forward rules

    Hope I got this in right section; I have a Netgear CG4500BD Modem/Router I have 13 cams. (just got last 4) I cant add another port forward rule (limited to 9) so I cant add additional cams in port forwarding. I can't make a range like 8110-8114 because it calls for a ending Ip address (...
  11. C

    Hikvision DS-2CD2032-I

    Looking at Hikvision DS-2CD2032-I (or updated version 2035-I ) doesn't come with a power adapter. Leaning toward it, whats your guys experience with this camera ? Where could I get a cheap power supply ? Will be using in Blue Iris.
  12. C

    Cannot remove Macro Overlay

    Had this happen to me last night I just kept clicking all around it in middle of screen and it finally showed the boxes around it so I was able to re-size and move it to side.
  13. C

    Multiple Switches or Hubs

    Kool Thank you very much !!
  14. C

    Multiple Switches or Hubs

    Thank you nayr for the fast reply. So daisy chaining Switches one after another causes no issue and they don't have a ip address like a router ?
  15. C

    Multiple Switches or Hubs

    Can I run Multiple Switches or Hubs in line ? ***Not POE *** [} -------[]==--------150ft cat 6----------[]======= Router .........^Switch 1 1- IP cam .......Switch ^ 2 2- IP cams Attached better drawing; If so whats a decent switch or hub at a cheap price ? Thanks
See more
Top Bottom