Recent content by CameraYager

Thanks IPCamer, I plugged the camera in port 3 and got port 10082 and that works. I only use two ports, so this is the simplest solution for now :-)

Hello all, Daylight savings time always gives my trouble with my setup (Dahua NVR4104-P-4KS2 with two Dahua camera's connected through PoE). When I change the date/time settings on my NVR, the timestamp in the recordings is not changed. So I learned that I need to change the date/time in the...

Thanks, I switched between views multiple times, but never noticed it untill now.

When previewing or playing back camera footage I can take snapshots or videos. However, I used to have a File option, which is now missing. The snapshots also don't show up in my gallery. Has this option been removed in an update of DMSS, or is it my app? Any thoughts?

Well it seems to work and also finally was able to get the upload to FTP server as well. :thumb:

Thanks for the good advice. I accessed cameras through IE and configured the schedules that were indeed still default. Will check this evening if its working, the emails have stopped during the day at least, but I hope not completely. Strange that some other settings like SMTP server are also...

No, AFAIK I created the IVS rules after I conencted them to the NVR. I played around with one camera before hooking it up to the NVR, but the issue is with both cameras. The cameras are connected to the NVR with a separate IP subnet, I can't connnect to the camera directly. Or am I overlooking...

Hi All, I have a Dahua NVR4104-P-4KS2 with two Dahua camera's connected through PoE. I have configured some tripwire and intrusion alerts and configured SMTP so I get emails with a screenshot whenever an alarm is triggered. This works fine and at the same time is the problem. I've configured...

Yes, I did and it doesn't work for me. I ordered a cheap 10" Johnwill touchscreen from Aliexpress for this purpose. It works when connected to my Windows 10 laptop and Android phone, but not with my Dahua DHI-NVR4104-P-4KS2.

Hi all, I've been tinkering with my Dahua NVR + camera setup for just over a week now and configuring events/alerts is a mess. After a lot of tries I got email alerts to work and uploading to FTP just doesn't work. The changes to the config just don't save and the NVT UI, SmartPSS, the webUI...

No, I was under the assumption that it had a builtin mic due to the spec sheet showing the supported codecs. Also the log shows some audio alarms, but at playback I couldn't hear anything. Thanks for the clarification

It's the NVR4104-P-4KS2 NVR and IPC HDBW4431E-AS camera.

Hi all, Got my first NVR and Dahua IPC camera today and so far I've failed to get audio to work. I've enabled audio in the settings but when playing back footage or watching live stream there's no sound. To rule some possible causes out, I'd like to verify some things with more experienced...