Recent content by arlobillz

Ok, many thanks for your help.

Ive got all three online in BI but cannot access cam 3 through the browser to access cam gui. Not sure whether to quit while I'm ahead or as you say factory reset. How do I do that incidently

Thanks, the last cam (3) which is not online I can't access the cam gui as it rejects both pass words I've tried in the config page you highlighted but no luck

Thanks, strange thing, when I opened BI, cam 1 was online. Checked its password setting and it displays old password. Then changed pass word in cam2 and 3 . Cam 2 came online but not cam 3. Not sure if I have been hacked cos very strange what is happening

When adjusting the time banner I went into each camera via a web browser ( pale moon) then into the settings which were the cameras settings. The password was also modified in the camera settings. Since I cannot access the cameras via the web browser now as they reject the password I cannot get...

The crazy thing is the gDMSS dahua android software on my phone logs me into the cameras okay with the modified password but blue iris wont

1) Yes, the time overlay at the top right of the camera image. 2) Initially just cam 1 was affected reverting ti the year 2000. After I changed the passwords they were going 0ne hour forwards on one of the cams and 1 hour back on the other while one stayed correct. 3) Viewing the cams in blue...

I noticed that the top timing banner on one of my dahau cameras kept changing every couple of weeks. I decided to change the password and duly modified it in my 3 cameras. This was okay for awhile but then I noticed all the time banners were changing on a regular basis. I went to change the...

is that ipconfig from command prompt, done that, no info from that. Ive got the old router but cant connect to find out old configurations. Tech junkie, Would disconnecting the switch from the router power down the cameras ? I set these cams up 5 years ago, so not sure how to configure router...

Dahua HDW5231R-Z

Its quite a few years since I originally set them up. I think you are right they have probably been assigned new addresses, but how to find now there is no signal. The router is a ZTE MF286D, ive been into that for connected devices but not much help for a laymen. cables seem okay. I think I did...

yes, everything else works, I get message 'No Signal' Error 8000274c

yes, I have a seperate computer running only blue iris and is cable connected to the router

I know this will probably be something simple but have just upgraded to another hub ( three sim broadband uk) but now have no signal to my cams. Presumably the ip address has changed. Been into the router settings and the old ip addresses are there without any label. Anyone help? Running Blue Iris 4

Yep, done that thanks