Recent content by angelojoanos

8400, 8500, 8600, and so on as you add more cameras. If your one that port forwards... 8401-8403, 8501-8503, 8601-8303...so on and so on. Be sure to change the camera port numbers according in the camera web UI.

Yeah it's the old cannon/Nikon mp sales Pitch war. I understand that. Still like the 2.8. Don't get me wrong, it's not horrible and the day pic justifies it but there is a noticeable difference. Would love this same 4mp camera in a 1.9 offering like the starlight. I may even go as far to adding...

man, I suck at that review stuff. Its a nice cam, wish they used a 2.8 sensor instead of the 1/3 for better night vision. Also was told that the ivs model is not released yet. Mine only has face or motion detection.

I would be very careful about using a 4K cam unless ur using it for day only viewing or in color mode with allot of available light at night. The higher the mp , the worse the night vision gets unless you move into the starlight series which uses a 1.9 sensor I believe. The newer 4mp cameras are...

Yes 2 of them. 1 Hunisun, 1 Sunba, 1 Dahua, 1 Avigalon. All onif cams should work well. Only time you may have a issue is with NOn Dahua PTZ. 90 percent of the time you can control the movement but not so much the presets, tours, scans, etc. I use a mix of cams depending on my needs. However in...

What would be a good contact to put on the interior of a door so when someone opens the door to the house, the input will alarm the big black face to check it out as well as the NVR to send a push notification to my iphone? Also any thought on using a wireless contact and hooking the receiver to...

starting to think not. Its has face detection but I guess no other IVS features. Just noticed the SD59430U-HN is listed as optional under IVMS :livid:

while trying to setup the Ivs tripwire on my 4216-4K Nvr, I keep getting this error message.

a friend is a installer and has acess to them..

Oh.....I also Had a Sunba 501 and 601 model. There is no comparison in build quality, zoom capability, firmware, and software to what the Dahua offers for the price.

I agree. I would go with the Dahua. I have the same one but in 4mp. The 2mp posted with give slighty better night vision. I also have a Hunisun 10x ptz. The extra money is well worth it. I tried saving money going with cheaper options, and eneded up with the Dahua!

I also use SmartPSS on occasion when setting by my imac. My NVR is hooked up via HDMI on a 55" 4k TV and its just 2 much fun to look around the street at 30x sometime. I only use the camera webUI for the camera settings and to set the PTZ presets, etc. Glad to hear you haven't had many problems...

Yep same one. I sent a email just because to see if there is anything newer. Only thing I'm not really liking thus far is the fact that you can only use the Ptz fuctions in single full screen mode on the NVR. Some others I have used allow you to use the Ptz fuctions in a multi window view...

what firmware version do you all have? Here is mine

I also have a 4216-4k PAL version NVR with a mix of PAL and NTSC cameras and they all work fine. I have my nvr hooked up via HDMI to a 4K tv and its my understaning that HD tvs can adjust to eithier.