Search results

8400, 8500, 8600, and so on as you add more cameras. If your one that port forwards... 8401-8403, 8501-8503, 8601-8303...so on and so on. Be sure to change the camera port numbers according in the camera web UI.

Yeah it's the old cannon/Nikon mp sales Pitch war. I understand that. Still like the 2.8. Don't get me wrong, it's not horrible and the day pic justifies it but there is a noticeable difference. Would love this same 4mp camera in a 1.9 offering like the starlight. I may even go as far to adding...

man, I suck at that review stuff. Its a nice cam, wish they used a 2.8 sensor instead of the 1/3 for better night vision. Also was told that the ivs model is not released yet. Mine only has face or motion detection.

I would be very careful about using a 4K cam unless ur using it for day only viewing or in color mode with allot of available light at night. The higher the mp , the worse the night vision gets unless you move into the starlight series which uses a 1.9 sensor I believe. The newer 4mp cameras are...

Yes 2 of them. 1 Hunisun, 1 Sunba, 1 Dahua, 1 Avigalon. All onif cams should work well. Only time you may have a issue is with NOn Dahua PTZ. 90 percent of the time you can control the movement but not so much the presets, tours, scans, etc. I use a mix of cams depending on my needs. However in...

What would be a good contact to put on the interior of a door so when someone opens the door to the house, the input will alarm the big black face to check it out as well as the NVR to send a push notification to my iphone? Also any thought on using a wireless contact and hooking the receiver to...

starting to think not. Its has face detection but I guess no other IVS features. Just noticed the SD59430U-HN is listed as optional under IVMS :livid:

while trying to setup the Ivs tripwire on my 4216-4K Nvr, I keep getting this error message.

a friend is a installer and has acess to them..

Oh.....I also Had a Sunba 501 and 601 model. There is no comparison in build quality, zoom capability, firmware, and software to what the Dahua offers for the price.

I agree. I would go with the Dahua. I have the same one but in 4mp. The 2mp posted with give slighty better night vision. I also have a Hunisun 10x ptz. The extra money is well worth it. I tried saving money going with cheaper options, and eneded up with the Dahua!

I also use SmartPSS on occasion when setting by my imac. My NVR is hooked up via HDMI on a 55" 4k TV and its just 2 much fun to look around the street at 30x sometime. I only use the camera webUI for the camera settings and to set the PTZ presets, etc. Glad to hear you haven't had many problems...

Yep same one. I sent a email just because to see if there is anything newer. Only thing I'm not really liking thus far is the fact that you can only use the Ptz fuctions in single full screen mode on the NVR. Some others I have used allow you to use the Ptz fuctions in a multi window view...

what firmware version do you all have? Here is mine

I also have a 4216-4k PAL version NVR with a mix of PAL and NTSC cameras and they all work fine. I have my nvr hooked up via HDMI to a 4K tv and its my understaning that HD tvs can adjust to eithier.

These work great http://www.amazon.com/CMVision-Listed-Regulated-Adapter-Illuminator/dp/B00K919SHG/ref=pd_sim_421_5?ie=UTF8&dpID=41bmpfKGmQL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0AN8TF7Z07PZ56F2SM86 I had a poe cam die and have been using these with great success.

The Ptz center button should bring up some hidden menu settings for the IR lights that you will niot see in CMS or through the webUi. First things first is you need to find the correct ip of the camera. Cycle the power and run a scan using devicemanger. Once you get the ip you should now be...

You can change the ip address of the camera to whatever you like in cms. Right click on the camera view screen and go to devicecofig then network. Change the ip and apply/save.

cms should remeber the cameras once set up. When you close the program it takes several minites for the zone to show the setup camera but it will after sevreral mins.

in the cms device manager, you must create a area first. Once you create an area it will then allow you to add the camera. Once you add the camera you can use device manager to change the ip address to your subnet.

Hi Kent, You should only have to install cms software one time. Did you unzip the file and istall it to your local hardrive. Also where did you get the softwae from the disk or sunba website?

its a shame because it could be such a great lil camera for the price if they just had some better firmware. Very well made and only 4" dome! I went ahead and returned mine. I could not put up with the washed out night vision with no day/night adjustment. I ordered the 601 model which has the...

Still not understanding why the V1 substream will work on IVMS-4500 mobile platform and the V2 camera wont. That is a deal breaker for me. I contaced Monica and she will "contact engineer about firmware". My 3X V1 cam has been flawless, well minus the poe going out which is no big deal for me.

LOL! Love it.. I have no problem setting up a more secure VPN. Wll have to look and see if that option is available in my dated netgear router. If not, im sure all my bandwith eating devices would not mind a new companion!!

Ok thanks. I just ordered the nvr so hopfully my cams will be compatable. VPN is a lil over my head as i have allways just port forward. Can you please explain the process of using idmss to remotly connect to the nvr to vew the cams. Is port forwarding of the nvr possible or will it require DDns...

A lil off topic, but what port settings do you use? I downloaded idmss and was trying to connect to my HIK cams to play without success. It may be possible that there not comparable . I noticed the default port is 47777. Have you changed this or just port forward the default. I assume that is...

Sure no problem. CMS to me is pretty straight forward and simple to use. I here allot of bad vibes about it I guess because it's not as feature rich as some of the others. However I don't require much, and just record 24/7. I also picked up a Sunba NVR which also uses a version of CMS. For 50.00...

Ok gottcha, I figured that was what you were referring to but had to verify.... Believe I will give it a go....thanks.

I should have one next week. Im in the process of returning the 501-20XB to sunba. They both use the same optics, but the night vision on the 601 (BLACK FACE) is much better. The day time quality is about what and what but the 601 has a bit faster focus since it is considered to be a speed dome...

Im not a big fan of webUI anyhow so that does not bother me. When u say the native app, are you referring to smartpss on ur mac or something else? I also have my current nvr hooked up to my tv so I could allways use the mouse as wellfor the additional features. I have a mixture of cams, Hik...