alastairstevenson's latest activity
-
alastairstevenson reacted to Davey's post in the thread How to - Fix your 15-beep-bootloop Hikvision DS-76xxN-Ex NVR, or convert to EN and make it updatable with
Like.
Thank you! You are a legend.. -
alastairstevenson replied to the thread Hikvision POE cameras.That's quite an old model NVR. What model and firmware version are the cameras you ended up buying? There may be some compatibility...
-
alastairstevenson reacted to looney2ns's post in the thread Camera is triggering alarm; can't figure out why and need help reading logs with Like.
Make certain the cameras pigtail doesn't have any "alarm wires" that are touching each other.
-
alastairstevenson replied to the thread How to - Fix your 15-beep-bootloop Hikvision DS-76xxN-Ex NVR, or convert to EN and make it updatable.Check your Conversations ...
-
alastairstevenson reacted to trempa92's post in the thread Alternative way of recovering HikVision NVR password with Like.
That was an exploit(some might say backdoor :)) which was updated later on, hence you cant get configuration file like that on newer...
-
alastairstevenson replied to the thread Hikvision POE cameras.If the cameras are 'inactive' and the NVR PoE port is set to Plug&Play all that's needed is to connect the camera to the NVR PoE port...
-
alastairstevenson replied to the thread How to - Fix your 15-beep-bootloop Hikvision DS-76xxN-Ex NVR, or convert to EN and make it updatable.What version of CN firmware did you apply?
-
alastairstevenson replied to the thread Playback stops loading at 89-90%.You should be able to play back recordings right up to the minute - there is no 24 hour buffer.
-
Update - I have talked with the seller and after some proposed changes in the config he also gave up and just asked me to send him back...
-
alastairstevenson replied to the thread Playback stops loading at 89-90%.Make / model of NVR and cameras? Do you get the same issue if you access playback via the VGA/HDMI interface?
-
alastairstevenson replied to the thread DS-2CD1121G0 Problem.That's a pity. A bit of a long shot - but there are quite a few newer versions of the NVR firmware here, mostly bugfixes /...
-
alastairstevenson replied to the thread DS-2CD1121G0 Problem.Is h.265 enabled on the camera? The E-series NVRs don't support that codec.
-
It might help if you told us the NVR model and the camera model(s).
-
alastairstevenson replied to the thread Is there a way to tell which of the motion detection areas has triggered?.Are you recording to a Hikvision NVR? In the web GUI, under System, tick the box 'Enable rules' and all triggered events will show on...
-
alastairstevenson reacted to wittaj's post in the thread Hikvision DS-7708NI-I4 / 8P sudden network issues? with Like.
If you had an attack detected, then maybe an attacker changed something. Were you using P2P or port forwarding? Maybe they turned P2P off.
-
alastairstevenson replied to the thread DS-7708NI-I4/8P Reboot Loop (Hikvision).As it doesn't look like the firmware update has also cleared the configuration, it may be worth checking (this varies from model and...
-
alastairstevenson replied to the thread DS-7708NI-I4/8P Reboot Loop (Hikvision).Yes, the same error triggering the reboot. My guess is it's a hardware fault, unfortunately.
-
alastairstevenson replied to the thread Firmware Update to Add Channels.The capabilities are coded into the bootpara data that's written into the flash during manufacturer - the firmware isn't different, it...
-
Many times the firmware is the same, but it is hardware and hard-code limited. But if you wanna try it for the good of the forum, go...
-
alastairstevenson replied to the thread DS-2CD2047G2-L Firmware problem.What elements are ticked in the camera web GUI under System | System settings | Metadata tab ?