DaHua NVR5216-16P-4KS2 firmware upgrade questions.
- Thread starter Xeddog
- Start date
Well, this is a thread I started in April 2020, but I am totally confused all over again. I have the NVR5216-16P-4KS2 (not the E, I think the E came out about 3 minutes after receiving my 4KS2). Again, looking through available firmware versions, there is one that is compatible with NVR5216-16P-4KS2E (but no 4KS2) and NVR5216-8P-4KS2 but not 16P), and another version compatible with NVR5216-4KS2 (but no 16P). What the heck? I seem to remember this happening the last time I looked, so I used the one that was closest (the one that had the 8P-4KS2), but I'm not sure about that. Is there one of them I can use??
If it helps, I'm currently running V4.001.0000000.1, Build Date: 2020-03-19
FWIW, I am not having any major issues and don't really NEED to update, but 1) I just like staying up to date, and 2) occasionally the video timestamps get all messed up.
If it helps, I'm currently running V4.001.0000000.1, Build Date: 2020-03-19
FWIW, I am not having any major issues and don't really NEED to update, but 1) I just like staying up to date, and 2) occasionally the video timestamps get all messed up.
Did you use DH_NVR5XXX-I_MultiLang_V4.002.0000000.1.R.220211 or DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.2.R.220120 ?
Will this firmware work on a NVR5216-16P-4KS2E with a build date of 2018-11-02? Attached is the version screen and is it still available for download? I clicked the link but it's no longer available from the destinationTry this one. But your NVR is 2017, So i am not very sure if your NVR is V2 or V1.
DH_NVR5XXX-4KS2_MultiLang_V4.001.0000000.1.R.200319.bin
1 file sent via WeTransfer, the simplest way to send your files around the worldwe.tl
Attention: Please be very careful before you update it, or else will kill the NVR.
Attachments
I found the following
www.dahuasecurity.com
It does list the NVR I have - any thoughts?
EDIT: for some reason the link does not work from the forum. Attached is a screen shot of the page
undefined
It does list the NVR I have - any thoughts?
EDIT: for some reason the link does not work from the forum. Attached is a screen shot of the page
Attachments
Last edited:
So it looks like DH_NVR5XXX_4KS2_MultiLang_V4.002.0000000.8.R.241030.bin is the last firmware update
I have been looking through the DaHua website and I found this one you mention. But the release notes state it supports
NVR5216-16P-4KS2E.
I've got half a mind to try it anyway, (make that a quarter of a mind since I have already lost half of it), but if it fails I could possibly be looking at a bricked NVR.
My NVR is the 4KS2E. Some have been successful. It is recommended to update in steps instead of one giant leap. I did three steps to upgrade to the latest firmware