nyte_ryder
n3wb
- Joined
- May 14, 2014
- Messages
- 3
- Reaction score
- 0
I need desperate help with configuring BI 3 (Ver 3.52) to support about 55 Dahua IPC-HDB3200C / HDW3200S cameras ..... CPU gets maxed out immediately after BI 3 is started...
Current Setup :
NVR PC : Windows 8 PC with Intel i7 4770K Quad Core CPU, 12GB of RAM, 2TB
Cameras : 45 Dahua IPC-HDB3200C (2MP) cameras (eventually total of 55 when done)
Camera Settings (Please see CameraSettings image) :
BI3 automatically jumps CPU usage to 100% even before the "Recording" starts (Delayed Traffic signal to not go to green for about 2 mins).
I have recently started getting an "Out of Memory " error from BI3 as of yesterday after I changed all cameras to Direct-to-Disc recording. There is ample Disk Storage and RAM on this new PC.
I am just frustrated at this point....Hope I can get direct instructions on how to set up BI, while maintaining the 1080p resolution and decent fps (project requirement).
I don't claim to understand the effect of every setting in the BI interface so I would appreciate any suggestions on the settings I need to be able to accommodate 55 cameras on my current NVR PC...
Please see image attachments ...
![BI3_Cameras.jpg](/data/attachments/0/354-9c25f89f5af313566b38be20839167db.jpg)
![CameraSettings.JPG](/data/attachments/0/355-49f24cc3ce2a71b2493dd265823c143c.jpg)
![Motion.jpg](/data/attachments/0/356-604011f1ee7a03041cd786e15cdfa060.jpg)
![Record.jpg](/data/attachments/0/357-9ff2a1979c0581a82d76469b6117536c.jpg)
![TaskMgr.jpg](/data/attachments/0/358-7adfe6a8648e3d946af8162551ae46fc.jpg)
![Video.JPG](/data/attachments/0/359-2c6fbb39ba760285f37248c77f7463e5.jpg)
![VideoFormat.JPG](/data/attachments/0/360-800acf22ca73d3e6dd3d1c164b6aa194.jpg)
Thanks
Current Setup :
NVR PC : Windows 8 PC with Intel i7 4770K Quad Core CPU, 12GB of RAM, 2TB
Cameras : 45 Dahua IPC-HDB3200C (2MP) cameras (eventually total of 55 when done)
Camera Settings (Please see CameraSettings image) :
- Resolution : 1920 * 1080
- Encoding (Camera) : H.264H
- 10 fps (Constant Bit Rate (CBR))
- BitRate : 1024 Kbps (Hardware setting)
- 1 Text Overlay
- Direct-to-Disc recording
- Recording on Trigger
BI3 automatically jumps CPU usage to 100% even before the "Recording" starts (Delayed Traffic signal to not go to green for about 2 mins).
I have recently started getting an "Out of Memory " error from BI3 as of yesterday after I changed all cameras to Direct-to-Disc recording. There is ample Disk Storage and RAM on this new PC.
I am just frustrated at this point....Hope I can get direct instructions on how to set up BI, while maintaining the 1080p resolution and decent fps (project requirement).
I don't claim to understand the effect of every setting in the BI interface so I would appreciate any suggestions on the settings I need to be able to accommodate 55 cameras on my current NVR PC...
Please see image attachments ...
![BI3_Cameras.jpg](/data/attachments/0/354-9c25f89f5af313566b38be20839167db.jpg)
![CameraSettings.JPG](/data/attachments/0/355-49f24cc3ce2a71b2493dd265823c143c.jpg)
![Motion.jpg](/data/attachments/0/356-604011f1ee7a03041cd786e15cdfa060.jpg)
![Record.jpg](/data/attachments/0/357-9ff2a1979c0581a82d76469b6117536c.jpg)
![TaskMgr.jpg](/data/attachments/0/358-7adfe6a8648e3d946af8162551ae46fc.jpg)
![Video.JPG](/data/attachments/0/359-2c6fbb39ba760285f37248c77f7463e5.jpg)
![VideoFormat.JPG](/data/attachments/0/360-800acf22ca73d3e6dd3d1c164b6aa194.jpg)
Thanks