adding KKmoon 809 to existing set up

Lyn Chapman

Lyn Chapman

n3wb
Nov 13, 2015
21
2
Hi, I have a system running 3 DBPower ip cameras and it works beautifully, no problems at all. Now I want to install a new camera I bought to try out, it's a KKmoon 809. It works fine with its own software but can't get it into Blue Iris. The problem I'm having is that I can't find the port it's streaming on. The port sniffer Identifies the ip but only give port 23 which I have tried but it doesn't work. Any one have any ideas on how to find the missing port number and the video stream path?
 
I've delved a little deeper and got this info from running wire shark whilst I had the cameras own software running. (192.168.1.86 UDP Source port: 5000 Destination port: 3618 ) can anyone offer any advice?
 
Lyn Chapman said:
I've delved a little deeper and got this info from running wire shark whilst I had the cameras own software running. (192.168.1.86 UDP Source port: 5000 Destination port: 3618 ) can anyone offer any advice?
Click to expand...
Do you have a link to this camera?
Also see this https://www.ipcamtalk.com/showthrea...amera-to-BI-that-is-not-in-the-drop-down-list
Keep in mind that some cameras simply cannot provide a stream to third party vms. I would suggest returning this camera regardless.
 
I gave up with the KKmoon and purchased a tenvis mini319w which works very well. One of the priorities was to get a small bodies unobtrusive camera and the tenvis fits the bill nicely. I had this up and running in less than 5 mins.
 
You must log in or register to reply here.
Top Bottom