It works properly in the AmcrestViewPro app.Which App. Amcrest Smart home or View Pro?
Why did you install the Amcrest app if you have the BI app?It works properly in the AmcrestViewPro app.
I did it so I could use the audio function only, since it isn’t working in BI currently. I setup with IP to test audio once it was already working innBI. BI is the only app I use for recording etc.Why did you install the Amcrest app if you have the BI app?
Did you scan a QR code with the Amcrest app?
IIRC, that model cam is not part of the Smart Home series and does not require initial setup with their app to work with BI.
So 2-way audio with the BI app should work when properly configured.
I have 3 of the Amcrest IP2M-841's that work properly for 2-way audio with the Bi app.
By "BI app" are talking about the one sold by BI that is put on your PHONE?BI is the only app I use for recording etc.
Yes the BI app from the Apple App StoreBy "BI app" are talking about the one sold by BI that is put on your PHONE?
Hey thanks you put me on the right path! My device make and model was set to generic. Changed it to the proper Amcrest model and it works great now! Thanks!!!If your corresponding pages look like these 2 screenshots below of my Amcrest IP2M-841 which has working 2-way audio, then I suggest you reset the cam, don't have anything to do with the Amcrest app, try again with BI.
View attachment 98399 View attachment 98400
In image #1, why the drop-down "http://" selected but the port ":443" (for "httpS") appended at the end of the camera IP?AMCREST 4MP UltraHD IP4M-1051
Can someone who has this working PLEASE help me out with this one. I've waisted too much time with trial and error and I still can't get back channel for talk support working.
Android Blue-Iris app has permission to use mic, location, storage
View attachment 105050View attachment 105051View attachment 105052
I'd go with http (default 80) vs. https.no clue... everything works both ways tho except for the two-way audio Im trying to figure out. deleted the :443 and selected https
Hey thanks you put me on the right path! My device make and model was set to generic. Changed it to the proper Amcrest model and it works great now! Thanks!!!