Best monitoring app for (hikvision) ip cameras

alexvas said:
To get video from Blue Iris in tinyCam Monitor app you should give short names your cameras Cam1, Cam2... in Blue Iris.
Click to expand...
I tested that and it still did not work. Also it would be nice if you can use any short name...
 
klasipca said:
Alex,

I tested DS-2CD3Q10FD-IW and DS-2DC2202I-DE3/W selections and unfortunately no luck for PTZ controls in the new mini PTZ camera which uses Hikvision API or at least partially. I get Command Failed (503- Not implemented) error. Is there any chance for you to take a look at that and add support for it?

This is the cam:

http://www.ipcamtalk.com/showthread...mera-impressions!-2015-PTZ-camera-of-the-year
Click to expand...

Can you provide me a temporary access to your camera for troubleshooting?
http://tinycammonitor.com/contacts.html
 
I use motionPie which uses the tried/tested Linus motion software running on a Raspberry Pi. I use two 2CD2032-I; the first of which ran on the test bench for a couple of months and now has been running for some weeks in the real world - reliable. I've just bought another Hikvision and upgraded the sofware, despite the Chinese config, it is running fine and ready for the real world.

The first Hikvision was bought expensively from Amazon; s/w v 5.3.0 in English. The second Hikvision was bought cheaper from China and turned up with 5.2.5 in the camera and 5.3.0 on the box. Sadly, motionPie (currently) cannot deal with 5.2.5 as it must have mjpeg, thus causing my Chinese upgrade.

Many thanks to all those who have posted their helpful findings.
 
I've changed the port for each cam. example 8001, 8002, 8003 etc.. and then port forwarded each one.
 
You can also simply change the external port for the cameras and keep the internal port the same.. Most routers support this function...

Sent via Taptalk
 
I've tried before keeping the ports the same, but that didn't work well for some reason related to the port mapping in the hikvision ui.
 
yeah I use tinycampro as well - android works great. Used to use IPCAMViewer but same as Klasipca UI was lame and never changed.

The only pain in the ass is turning off some of the options like Audio Alarm, when I arrive on site. Don't know if IVMS4500 allows that as haven't spent the time to get that working yet.

Tinycampro worked with my Hikvisions and well as my cheapo Foscams that I had as a cheapo temp system for a number of years that I'm now swapping out for the end game.
 
klasipca said:
I've changed the port for each cam. example 8001, 8002, 8003 etc.. and then port forwarded each one.
Click to expand...

I have changed the Media ports of my ip cameras in the web interface as suggested. After that I forwarded the ports in my modem. Still the cameras won't show up in IVMS-4500.

Any help appreciated.
 
Last edited by a moderator:
Hey all - perhaps I'm doing something wrong but I can't seem to find the iVMS-4500 (lite or HD) in the U.S. iOS App Store. I've found and downloaded the 5060,5260,4250,8700 and none of these seem to work with the new 4mp turret. Any ideas on where I should go to get it since it doesn't seem like this, tinycampro or ipcam is in the U.S. App Store for some reason. I can't change regions as I have a credit balance preventing me from switching. I'm looking to get it on my phone and can't find anything that will work. Thanks!
 
Last edited by a moderator:
serveradmnstrtr said:
Hey all - perhaps I'm doing something wrong but I can't seem to find the iVMS-4500 (lite or HD) in the U.S. iOS App Store. I've found and downloaded the 5060,5260,4250,8700 and none of these seem to work with the new 4mp turret. Any ideas on where I should go to get it since it doesn't seem like this, tinycampro or ipcam is in the U.S. App Store for some reason. I can't change regions as I have a credit balance preventing me from switching. I'm looking to get it on my phone and can't find anything that will work. Thanks!
Click to expand...

The reason you can't find it is because it has been removed from the App store, due to the XCodeGhost vulnerability. You would need to wait until they release a new version with a clean XCode.
 
Ahh, didn't realize this was affected by that. I did find the HD one for my iPad - should I be worried about that one since it wasn't pulled?

I knew something had to be going on since there's no way the app wouldn't be available in the U.S.

Thanks for the reply, I'll keep an eye out to see when it comes back.
 
serveradmnstrtr said:
Ahh, didn't realize this was affected by that. I did find the HD one for my iPad - should I be worried about that one since it wasn't pulled?

I knew something had to be going on since there's no way the app wouldn't be available in the U.S.

Thanks for the reply, I'll keep an eye out to see when it comes back.
Click to expand...

Someone mentioned that the HD version/Ipad version was still available but I looked yesterday and I didnt find it. I just had a look now and also can't find it.

So either it's been pulled as well or I'm blind.

Here are the earlier posts on this issue.

http://www.ipcamtalk.com/showthread.php/5645-IVMS-4500-Removed-from-Apple-App-Store
 
Anybody else having issues with the latest android version of IVMS-4500?
Ever since updating to version 4.2.0 (build 20150820) none of my cams are viewable. They are detected however they just load forever and nothing happens. This app worked seamlessly for me previously.
 
I don't have any issues with 4.2.0 on my S5.

Did the quality change from Fluent to Clear? or did you mean even on the local network it doesn't load?
 
Even on the local network it won't load. I just get the spinning circles for each cam and that continues indefinitely. What makes it worse is the app won't close either. After hitting close the app wants to stop the camera feeds but they never actually started so it can't stop them. It just continues to say closing. This of course disables my screen lock whilist the app is still running in the background until I manually kill it. This was such a great app. Coupled with Hikvision's lack of chrome support this is pretty frustrating.
 
You must log in or register to reply here.
Top Bottom