I have the same issue here, but not every year. Some years I need to use chemical stuff to get rid of them, they are literally everywhere and sometimes they get into the house as soon as my children leave some candies or sweet stuff on the floor.Wow, freaky. I should check mine for any gaps and maybe deploy some caulk as a preventative measure too. We have zillions of ants around our house.
Walked into the bathroom one morning and the floor was crawling with ants. My wife wouldn't go near that bathroom for days after that.
I have no idea, I didn't open it, but I guess it's very dark and warm in there.mamma mia! What was in there that could attract them?
Not on the side, maybe on the button, when my 2 daughters come back from school and ring the bell. I don't know. Probably it's comfortable in there, very hot and dark.Curious maybe some one played with the doorbell with sticky fingers?
If your talking about the AP password for the doorbell it is the verification code. Its 6 UPPERCASE lettersBeen a min since i was here. Ok my DB1 suffered a power outage and now its stuck with softap_ SSID and I cant log into it because I dont know the wifi password. I thought it was the verification code but nope its not that. So what is it? I cant connect with batch config unless i know the wifi password.
My RCA was doing this and stopped after I replace the SDCard with a new high-end (3x the price) SDCard. The "card needs initialized" msges have stopped with no more problems for about 8 or 9 months now. The odd thing is that the old SDCard works fine in my desktop PC. I can do a full format (not fast) with no errors so I have no clue why it fixed the problem. It could have bean a write speed problem, but that is just a guess.Hey, anyone else have an issue with their db1 randomly saying the sd card needs to be formatted? But then when I try to format, it fails and will only work if I turn off my bell breaker for a restart. Seems to happen every month. Kind of annoying and sucks if I actually need footage as it won't let me view anything and my only option is to format. I'm using ezviz, it is stock ezviz with firmware 5.2.4.191211.
THanks will give it a try. I dont think I changed it. I tried the verification code and it seems to think that is to short of a password 6 characters long. Ill try the reset but I wondered if I was wrong about verification or if it was the varification code twice or something like that.If your talking about the AP password for the doorbell it is the verification code. Its 6 UPPERCASE letters
You CAN change this password in BC, If you did change it before you can REMOVE power (1 of the wires) from the back of the DoorBell. WAIT for all the leds to go out (could take 10min or little longer) and about 5min after they go out. Then HOLD DOWN the reset button, do NOT LET GO, restore power (put the wire back on) while still holding down reset. Keep the power ON and the reset held down (not so easy I know) till it tells you the reset it done. This SHOULD restore the PassWord if you did change it. This works on the RCA and Hik doorbells with any firmware. I have not tested on the others. This is NOT the same as just holding reset! If it does not work the first time remove the SDCard and try again.
Good Luck
My RCA DB looks like thisTHanks will give it a try. I dont think I changed it. I tried the verification code and it seems to think that is to short of a password 6 characters long. Ill try the reset but I wondered if I was wrong about verification or if it was the varification code twice or something like that.
ohh I have to type softap_ verification that explains it.. THANKSMy RCA DB looks like this
Login = softap_C95752724
PW = softap_BZFSJN
I know the caps does matter!
What build of BC are you messing with and what OS?Have any of you had the batch configurator complain about being forced to run at 1024x768. Its bizare and i cant even use it.
No I figured it out, some kinda bug if you use a newer version then 3.0.26. Another issue how do I change the SSID? i cant seem to find that options in batch config.What build of BC are you messing with and what OS?
I could see this being a problem if your running it on an old laptop / video card that is running 800x600 rez perhaps. If you have one that is still working
networking / wifiNo I figured it out, some kinda bug if you use a newer version then 3.0.26. Another issue how do I change the SSID? i cant seem to find that options in batch config.
Ok but still need to know what to change it to. I know I can just add it to my network but I'd like to know for future this is the 3rd time this has happened to me.networking / wifi
Why are you looking for the SSID? You can do the network setup in BC ( instead of the DB App ) and skip all that crap if your renaming just to get the app to find it.
Ok but still need to know what to change it to. I know I can just add it to my network but I'd like to know for future this is the 3rd time this has happened to me.
I just added it back to my network but what I was wondering is what the ezviz default SSID is? I believe its ezviz_serial# right?Its in BC
networking
wifi very top first line, just type in new ssid click save.
that is it