RJ45 female to 8 pin screw connector

C

ctgoldwing

Getting comfortable
Nov 8, 2019
507
678
Beacon, NY
Does anyone have any experience with these adapters?
1584147765358.png

I have to install a few more cameras in the woods and am not looking forward to crimping connectors on a ladder :(

These would definitely make it an easier job but will they cause any signal degradation to be concerned about?
 
Wow...how were you planning on weatherproofing that thing, man?

Also, wouldn't your camera's pigtail also be female?
 
  • Like
Reactions: Mark_M
TonyR said:
Wow...how were you planning on weatherproofing that thing, man?

Also, wouldn't your camera's pigtail also be female?
Click to expand...
:) I have a second one of these mounted on the tree I am working on now:

1584219864392.png

It turns out I am going to crimp a connector on anyway. I tried to pull 2 cat6 cables through the 3/4 PVC conduit that already had a 14/2 wire in with no luck. So I'm only putting one camera there for now. I may end up putting a 4 port switch in the box in order to get another camera there. The only other choice I see is to replace the 95' of 3/4 with 1".

I can suck it up on the ladder for 1 connector.

Oh the gender issue :( I pulled the wrong pix up - they make both male n female.
 
Last edited:
OK, that solves the weatherproofing...what about the gender?
Would a male like below work somewhere?

RJ45M-to-terminal.jpg
 
  • Like
Reactions: ctgoldwing
  • Like
Reactions: ctgoldwing
Thanks TonyR! This project has turned out not quite like planned :(

I started crimping the connectors inside last night and as soon as it warms a little today I'm going to install the crimp and 1 camera
 
  • Like
Reactions: TonyR
You must log in or register to reply here.
Top Bottom