I've had IVS Tripwire notification setup for a while and all seems to work fine. However I've noticed a setting on the camera IVS page called "Pixel Counter". Can anyone explain what this is and how to use it?
IVS Pixel Count Setting
- Thread starter Andyh747
- Start date
looney2ns
IPCT Contributor
I had been wondering this as well.
I find it mentioned on pages 86 and 87 of this manual: https://dahuasecurity.s3-ap-southea...k-Camera-Web3.0-Operation-Manual_V1.0.614.pdf
But, the wording is confusing. If anyone can decipher it, please share.
SkyLake
Getting comfortable
- Jul 30, 2016
- 354
- 299
In my understanding, this just a "tool" for measuring. If you want to know for example how many pixels a person or other object has in a specific area, you can draw a pixel counter box in the preview image.
After that, you can setup the IVS rule detection rectangle to the minimal and maximum pixels. If a person in the image counts lets say 50 x 300 pixels, and if that is the minimum you want it to detect, you can set that minimal detection box to 50 x 300 pixels. The maximum detection box, you would then set to a bigger pixel count.
It is just a measuring tool.
After that, you can setup the IVS rule detection rectangle to the minimal and maximum pixels. If a person in the image counts lets say 50 x 300 pixels, and if that is the minimum you want it to detect, you can set that minimal detection box to 50 x 300 pixels. The maximum detection box, you would then set to a bigger pixel count.
It is just a measuring tool.
Last edited:
SkyLake
Getting comfortable
- Jul 30, 2016
- 354
- 299
Sorry, which Global Setup Tab do you mean? As i don't see this anywhere at the moment.
looney2ns
IPCT Contributor
Assuming you have one of the new AI cams, it's here? Sorry, I was assuming a lot when I asked that.
