Double click on the top header of the clips section.I'm probably overlooking things but how do you move the clips/archives from the left side to the right side? I know someone mentioned this before and it was added as a feature but I can't figure it out.
Thank you very much!Double click on the top header of the clips section.
Might need to switch the camera group or adjust the group settings.Just updated my second of two BI machines to 5.0.0.56. This machine has 13 cameras vs the other just one.
I can only see one of my cameras and am not yet sure how to view the others. Alerts of the other cameras are still there but when I log in via UI3 or from the Android, I only see one camera.
I tried reimporting settings, uninstalling and reinstalling and even re-adding the cameras. Once I close BI and relaunch, only one camera remains.
Turns out I deactivated, re-activated and then re-imported my settings. All cameras are now showing and motion detection appears to be intact. Perhaps I activated they LE License instead of full. Operator Error Thanks for the help!Might need to switch the camera group or adjust the group settings.
Yes. Either one of those options will work. As the site explains Support | Blue Iris "Any of these will upgrade a version 4 key to version 5 (indefinitely)"Just to clarify, is the opportunity still available for me to sign up for extended support and maintenance plan and get a free upgrade from BI4 to BI5? If so, do I need the $30 annual subscription based support plan or the $35 annual plan with no extension? Could not find indication of this on the BI website. Thank you!
Thanks! Guess I should've read the obvious red text on that page! Not sure how I overlooked it...Yes. Either one of those options will work. As the site explains Support | Blue Iris "Any of these will upgrade a version 4 key to version 5 (indefinitely)"
Your pc will explodeDo I have to migrate to V5? If I don’t want to, what’s the worse can happen?
Sent from my iPhone using Tapatalk
When you open a camera's properties, and go to the Trigger, Record or Alerts tabs where the profile is changeable, the profile showing will be the same as the global profile. So if you have a camera using it's own schedule and on a different profile than the global profile, you'll see the global profile in those tabs when you open camera properties. If you have camera names displayed (right-click), you'll see the active profile in the window name area for any camera that you're overriding the global schedule.An interesting note regarding Profiles. I recreated a continuous profile (Profile 2) and assigned it to a couple of cameras... they do record continuously but display Profile 1 within camera properties. Confusing, but performs as designed. (unique feature, rather than bug )