I hate to re-open this issue up; but I'm experiencing the same issue. With setting just one camera for direct to disk, there is no Ghosting noticeable. However the more cameras that are set to Direct to Disk; the more the ghosting is noticeable and exaggerated.
I've installed
Blue Iris Latest Version (Demo) on a second machine, and copied all the settings over. It produces the same issue.
Camera is 1520p, FPS is 20, IFrame is 20; I've set BLUEIRIS MAX FPS to 20 or 30, Buffer is 20MB with the same results.
... Was unable to find the exact FPS settings referred to in this post; I assume these settings were only in the older version
Performance Stats do not indicate the HD/CPU/RAM/Network are under any real stress to cause this.
Here is a sample:
On a second note, with each camera I enable I lose FPS on an existing one. Does anyone know what the bottleneck is that causes this low frame rate issue (CPU/HD/Network/Memory), I just don't see any load that would cause this either?
Thanks in advance for all your help! Great software as compared to iSpy or Sighthound.