If you test with local connections only (using a browser on the machine running stunnel) then you don't have to worry about firewalls. Be sure to use the address 127.0.0.1
I thought about that but the problem is that stunnel fails at boot and when I reload the configuration it returns an error. This means that stunnel won't run despite it initially run successfully when I configured it. I have tried all possible combinations while editing the configuration. Even experimented with different ports but it keeps failing. This is why I thought it might be a firewall issue after all. However, from what I understand now as long as it doesn't run at all, the firewall shouldn't be the fault here.If you test with local connections only (using a browser on the machine running stunnel) then you don't have to worry about firewalls. Be sure to use the address 127.0.0.1
Yes, it works exactly like you described.How can I reference a specific cam with a single url ? - http://x.x.x.x/ui2.htm works OK - but then I need to select a cam - what would be fab is http://x.x.x.x/ui2.htm?cam=<camname> - is there anything like this available ?
Ah yes.. OK... So.... Is it possible to jump into ui2 with the ?cam= specifier and have just the cam specified full screen - i.e. No top menu and No Alert bar ?Yes, it works exactly like you described.
In UI2:Ah yes.. OK... So.... Is it possible to jump into ui2 with the ?cam= specifier and have just the cam specified full screen - i.e. No top menu and No Alert bar ?
Cheers !
When I use the download option from the clips pane on the left, I always get a new tab just filled with code, see picture.You'll have to be more specific.
Internet Explorer apparently has trouble with this. Blue Iris doesn't specify the type of content being sent, so IE interprets it as text instead of a file download. I've asked if this can be fixed in Blue Iris.When I use the download option from the clips pane on the left, I always get a new tab just filled with code, see picture.View attachment 23801
When UI2 checks for updates, it just loads and executes this script: https://ipcamtalk.com/bp08/ui2_version.jsI was looking to create an auto update script with powershell and I was wondering what method you used to check to see if an update was available?