I received and installed the TP Link POE Splitter Adapter (TL-Poe10R). There seems to be a problem.
When I connect the Poe Splitter at the POE switch end, the video freezes after a few seconds, then goes back to normal when ever it feels like, but then again freezes...it's a cycle that just repeats itself.
The green LED light on the POE switch blinks slow (I can tell just viewing by the blinking rate of the LED the video will freeze), the orange LED on the POE switch remains on solid. There is a photo of POE switch I am using on OP.
If I connect POE Splitter Adapter at camera end, there is no problem. Video comes on with no problem and the green LED at the POE switch blinks fast just as all the other green LEDs on the POE switch.
I would rather have the POE Splitter at the POE switch end and not at the camera because at the camera end the POE Splitter Adapter would be in the attic.
Any suggestions, thanks in advance.