Camera reboot on Watchdog: how make it work?

technet

technet

Getting the hang of it
Dec 25, 2014
135
17
Hello everyone,

I'm facing the need of the camera reboot to work, as defined on Watchdog tab.

Camera's are Dlink's DCS-2130L. I've checked all the options, including 'interpret monochrome as loss of signal', and in no way it works. I have to manually open the web page of the camera and find the reboot command on the interface.

Any help would be greatly appreciated!
 
technet said:
Hello everyone,

I'm facing the need of the camera reboot to work, as defined on Watchdog tab.

Camera's are Dlink's DCS-2130L. I've checked all the options, including 'interpret monochrome as loss of signal', and in no way it works. I have to manually open the web page of the camera and find the reboot command on the interface.

Any help would be greatly appreciated!
Click to expand...
Blue iris may not support rebooting that camera...you can email support and ask him to implement it...he will need direct access to the camera.
 
Hi fenderman,

No other similar D-Link camera that we could use as a URL example? Also, I think that I need to set a Event Schedule to reboot every day. Those cameras sometimes gives audio but no video, although they are good cameras.
 
technet said:
Hi fenderman,

No other similar D-Link camera that we could use as a URL example? Also, I think that I need to set a Event Schedule to reboot every day. Those cameras sometimes gives audio but no video, although they are good cameras.
Click to expand...
No idea, you can test. You can also try pulling the onvif profile by using the find inspect function. Then see if the reboot command works. If they are locking up like that they are not good cameras....
 
Application was updated to include brightness, contrast, digital output and others for this PTZ type.
 
  • Like
Reactions: fenderman
You must log in or register to reply here.
Top Bottom