Search results

It's interesting, my assumption was wrong by two things: 1. Sonoff that is connected to HA is in LAN mode - local communication (although is LAN, it goes by some server) 2. MQTT addon doesn't pick up every event, only every second pushbutton What addon are you using to pickup events on VTO in HA?

Has anybody disassembled VTO or have a schematics maybe?

Since Dahua doesn't have a chime that can be used instead of indoor unit (VTH), I've decided to connect my VTO to HomeAssistant to mqtt listener when the button is pushed. When the button is pushed, mqtt sends info to the automation in HA and it triggers an Sonoff device that is connected to...

This should be normal behavior as far as I'm concerned. The logic is if you have reacted to the call, no need to record it. Maybe you could play a little bit with settings in the admin config to record all events. Also I have an NVR and somehow I have turned on motion detection on VTO either...

Either way, let us know the end result when you install new FW. One more thing can you please try to see if there is a video in Message section of the DMSS app when you press the button at the doorbell or can you leave a message after the ringing ends? Thanks

I see that they have even newer version of FW at the pages. I would suggest to you to try and update FW, after that format SD card by IP admin interface (probably same FAT format) and after that try to see if there is an improvement.

Are you sure that not all events are recorded? What version of FW do you have and have you looked at DMSS app under Playback or Messages?

I don't have VTH only VTO connected with NVR and recording and motion works but this things simply disappeared at 4.5 version, you have them all on 4.3 and I think 4.4

I've contacted technicians and after a month or two, they've send me custom made firmware. It can record now but it's still pretty bad logics like sudden tempter alarms, you can't look for the previous events like when someone rang, you don't have a list of rings... I'll suggest you to contact...

I have VTO2211G-WP, after a long time considering I have decided to go with that doorbell because it has WiFi as a redundancy if the LAN cable goes wrong for some reasons. It has an RFID card reader, a two-door ability to open, can work with PoE but at the moment I use a 12V DC 2.5A power supply...

Yes I have tried the oldest of oldest IE on Win7, cleared cache and everything, but no luck. Is there a way to see the code of the firmware, maybe I could see what are the conditions for that element to show up or maybe I can downgrade to older firmware?

Hi all, thank you so much for the previous/first post support, it really shows the good spirit of this forum. Now the problem that keeps me up for many nights. I have VTO2211G-WP and it's missing Events options on Web Service 2.0 page. This is my page on http://192.168.0.108/#/Local it's...

Hi, I've got VTO2211G-WP doorbell and have tested with 12V 2.1A on wires and works like a charm. Now I would like to mount it and power it by PoE. The adapter that I have got is from MikroTik HS24-2400 rated output 24V 1A and of course nothing powers on when I connect it with LAN cables...