Ways to integrate wired sensors into automation system

hmjgriffon

hmjgriffon

Known around here
Mar 30, 2014
3,369
976
North Florida
so I've got my pi and I can use zwave sensors wonderfully to do things but if I want to use some wired stuff does anyone have any experience with integrating wired sensors and things with either raspberry pi GPIO pins or some other way? Maybe something you put on the network like a sealevel device but that can talk to linux for checking when stuff is triggered or not? Don't have an immediate need but would love to be able to do it when I do.
 
Its on my list lol.

For me the harder part is passing the information into domoticz. Wiring and connecting should not be too hard.

I ordered a pi zero-w to install in my garage, plan to put sensors on the garage doors and side gate.
 
randytsuch said:
Its on my list lol.

For me the harder part is passing the information into domoticz. Wiring and connecting should not be too hard.

I ordered a pi zero-w to install in my garage, plan to put sensors on the garage doors and side gate.
Click to expand...

Yes, I believe @nayr has some stuff hard wired into some pi's with domoticz, maybe he can chime in.
 
IIRC, he recommend a brand of zwave sensor where when you pop the cover off has two terminals to hook up a wired dry contact, essentially turning it from a wired sensor to a zwave sensor. I think he did that with the pressure mat at the front door maybe?

Check out this post:
Anyone using a Z-Wave doorbell or doorbell sensor?

For my Raspberry Pi, I added a Piface digital module to it and had 6 wired door sensors attached to it. It'd run a little script that would do a rest call to my home automation system, telling it which door had opened/closed.
 
Last edited:
IMG_0911.JPG
 
  • Like
Reactions: hmjgriffon
If either of you guys are interested in this version of the Piface, I'm selling mine for $30 shipped. I ended up moving my wired sensors over to an ELK security panel and don't have a use for it anymore.

@hmjgriffon, attached is a Python script that someone wrote on the ISY forum. The script waits around for an interrupt from the Piface (i.e. a sensor changed state), and then does a HTTP REST call to the ISY to update a variable so the ISY knows which sensor changed, and if it changed to open or closed. There is also a heartbeat loop, where if not interrupt has happened in 30 seconds, it sends a heartbeat, so the ISY can tell if the Pi stopped updating (for whatever reason). I'm guessing you just want to look at how it handles the interrupts, and then code your own from there.
 

Attachments

aristobrat said:
If either of you guys are interested in this version of the Piface, I'm selling mine for $30 shipped. I ended up moving my wired sensors over to an ELK security panel and don't have a use for it anymore.

@hmjgriffon, attached is a Python script that someone wrote on the ISY forum. The script waits around for an interrupt from the Piface (i.e. a sensor changed state), and then does a HTTP REST call to the ISY to update a variable so the ISY knows which sensor changed, and if it changed to open or closed. There is also a heartbeat loop, where if not interrupt has happened in 30 seconds, it sends a heartbeat, so the ISY can tell if the Pi stopped updating (for whatever reason). I'm guessing you just want to look at how it handles the interrupts, and then code your own from there.
Click to expand...
Are you conus?
 
You might want to research a WIFI based Arduino. The ESP8266 nodeMCU is a really capable form of Arduino. They can be had for about $6 (eBay) and can communicate over wifi. The nodeMCU has nine digital pins and one analog. I'm currently working on a multi-sensor that will have wired sensors for carbon monoxide, PIR motion, temp, humidity, and multiple door/window sensors (in series so only one analog). It will communicate via wifi to HomeSeer3. I plan on having 6 of them around my place. It is currently working on a breadboard. I think I will be able to make them for about $20 each. I've only recently gotten into Arduino and am very impressed.

Here is a Fritzing (great free tool!) diagram:

DarringtonMultiSensor_bb.jpg
 
logbuilder said:
You might want to research a WIFI based Arduino. The ESP8266 nodeMCU is a really capable form of Arduino. They can be had for about $6 (eBay) and can communicate over wifi. The nodeMCU has nine digital pins and one analog. I'm currently working on a multi-sensor that will have wired sensors for carbon monoxide, PIR motion, temp, humidity, and multiple door/window sensors (in series so only one analog). It will communicate via wifi to HomeSeer3. I plan on having 6 of them around my place. It is currently working on a breadboard. I think I will be able to make them for about $20 each. I've only recently gotten into Arduino and am very impressed.
Click to expand...

Hey LB
Are you going to integrate this in with Domoticz?
What sw are you going to run on the Arduino/ESP?
I like arduino's, I have some ESPs but haven't really used them yet.

I may use a pi zero w instead, but they are a little more expensive and still in short supply.
But a small, relatively inexpensive motion sensor would be very cool.

Randy
 
randytsuch said:
Hey LB
Are you going to integrate this in with Domoticz?
What sw are you going to run on the Arduino/ESP?
I like arduino's, I have some ESPs but haven't really used them yet.

I may use a pi zero w instead, but they are a little more expensive and still in short supply.
But a small, relatively inexpensive motion sensor would be very cool.

Randy
Click to expand...

My home automation is based on HomeSeer. There are several ways to connect Arduinos to HS. The one I am using is a plugin that has a base app for the Arduino that handles wifi connectivity and messaging. I only have to add the code to manage the sensors themselves.
 
  • Like
Reactions: randytsuch
You must log in or register to reply here.
Top Bottom