trying to add swann NVR to blue iris

[RWDM3]

so i think main issue im having is with the RTSP..
according to my NVR, it says RTSP 554, but if i put that in - it says RTSP 400 BAD REQUEST.

address http:// i got from the main network remote configuration screen (using the one shown under IP address and added :85 - this is the http port showing 85)
the ONVIF port on blue iris im using the CLIENT port.

if i change the RTSP to 85 (same as HTTP port) i get this
but shows I/O ERROR :0

not sure if i should be blanking IP address out so i did.

 

[TonyR]

You're correct, no need to redact your local, private (LAN) IP...we all got 'em. It's your WAN (public) IP you want to keep to yourself. My BI server's LAN IP is 192.168.1.239, port 81.

Does your NVR model appear in the "Swann" drop-down menu?

If not, I'd delete that entire cam and start over with a new cam.
Put in the NVR's LAN IP, user/pass and let BI do a "Find/Inspect".