The addition of my first camera, a DS-2CD2732F-I, was a simple plug-and-play operation on my 7608NI-E2/8P NVR.
However, adding the second camera, a DS-2CD2732F-IS, is not proving so easy. Attached is an image from the NVR Camera Configuration page. The new camera is recognized by the NVR, but it hangs out on its own outside of the 8 available ports, and through several attempts, can not get it to output to the NVR.
I am a complete beginner and could use some help. Any thoughts on how to get this camera to cooperate?
Thank you in advance!
However, adding the second camera, a DS-2CD2732F-IS, is not proving so easy. Attached is an image from the NVR Camera Configuration page. The new camera is recognized by the NVR, but it hangs out on its own outside of the 8 available ports, and through several attempts, can not get it to output to the NVR.
I am a complete beginner and could use some help. Any thoughts on how to get this camera to cooperate?
Thank you in advance!
