Trigger but no Recording

[danbar]

I have a single (for now) Foscam FI8910 in a wireless configuration. I am in the process of leaning BI and BI seems to sense the trigger (via of the Motion/Trigger tab), but no recording takes place. I have attached the config info for each. Manual Recording seems to work ok....

Thanks,
Dan

 

[fenderman]

Is the image border turning red to indicate trigger?
For testing, lower you size threashold to half way. Also, select color and brightness (not brightness alone)...
As an aside you might what to increase your pre trigger frames to at least match your fps...you have it set as 1, that is not 1 second but rather 1 frame...if you want to get one second before the trigger, then match it to your cameras fps.

 

[danbar]

Oh my gosh....you did it again!!! Followed you instructions to the letter, and voila! instant success!! You are the best and Merry Christmas!!!! Bye the way, looks like I will move off the demo a actual purchase the real McCoy...hahahahah

 

[fenderman]

Hey no problem!