TP-Link N220 on Blue Iris

C

charliehorse

Young grasshopper
Jul 28, 2014
37
5
Hi All
Got a TP link N220 cam. It is not listed in the Blue Iris configuration list.
Does anyone know if it is possible to get it running.
It runs great on its own Android app but I would like to get it on Blue Iris too.
Regards
Charlie
 
charliehorse said:
Hi All
Got a TP link N220 cam. It is not listed in the Blue Iris configuration list.
Does anyone know if it is possible to get it running.
It runs great on its own Android app but I would like to get it on Blue Iris too.
Regards
Charlie
Click to expand...
Many "cloud" cameras cannot send a local stream to third party vms. You can try these methods..
https://www.ipcamtalk.com/showthrea...amera-to-BI-that-is-not-in-the-drop-down-list
The camera is a low resolution mpeg only camera, I would return it.
 
fenderman said:
Many "cloud" cameras cannot send a local stream to third party vms. You can try these methods..
https://www.ipcamtalk.com/showthrea...amera-to-BI-that-is-not-in-the-drop-down-list
The camera is a low resolution mpeg only camera, I would return it.
Click to expand...

Hi Fender,
Thanks for the reply and link, I have Robert Chou's app scanning it now.
I bought it for a backup to Blue Iris. It can watch a key area of my property.
If the machine that runs BI fails, this should work independantly.
Res is not great but I can see if someone is intruding and listen in too.
Regards
Charlie
 
charliehorse said:
Hi Fender,
Thanks for the reply and link, I have Robert Chou's app scanning it now.
I bought it for a backup to Blue Iris. It can watch a key area of my property.
If the machine that runs BI fails, this should work independantly.
Res is not great but I can see if someone is intruding and listen in too.
Regards
Charlie
Click to expand...

Got this working with some help from a TP-Link forumite.
Heres the setup for anyone looking.
Settings
Make GENERIC
In dropdown (near top) RTSP H.264/MJPG/MPEG4
path /h264_vga.sdp
Don't forget to forward port as usual in router interface. Port number can be changed in camera interface.
 
charliehorse said:
Got this working with some help from a TP-Link forumite.
Heres the setup for anyone looking.
Settings
Make GENERIC
In dropdown (near top) RTSP H.264/MJPG/MPEG4
path /h264_vga.sdp
Don't forget to forward port as usual in router interface. Port number can be changed in camera interface.
Click to expand...
beware that forwarding these cameras that rarely get security updates is a risk..you are better off simply using the blue iris webserver or a vpn.
 
You must log in or register to reply here.
Top Bottom