Time Stamp
- Thread starter jland47
- Start date
zero-degrees
Known around here
- Aug 15, 2015
- 1,335
- 844
I'm not sure that is what I need to do. when looking on the desktop screen at my cameras the time is an hour and 7 min ahead of the real time. Seems like there should be a setting where I can just change the time.
zero-degrees
Known around here
- Aug 15, 2015
- 1,335
- 844
Few issues here.
1. Are you actually using BI, that's the sub you posted in. The link I sent above references where those settings most likely are.
2. If you are discussing the camera itself you need to log into your camera GUI and find the "time setting" then either set it manually or link it to a NTP server - find a local one here pool.ntp.org: the internet cluster of ntp servers
3. Is this on just one camera, or all cameras.
Your post is very vague, so it's hard to provide any sorta direction.
1. Are you actually using BI, that's the sub you posted in. The link I sent above references where those settings most likely are.
2. If you are discussing the camera itself you need to log into your camera GUI and find the "time setting" then either set it manually or link it to a NTP server - find a local one here pool.ntp.org: the internet cluster of ntp servers
3. Is this on just one camera, or all cameras.
Your post is very vague, so it's hard to provide any sorta direction.
Yes I am using BI on my desktop and mobile phone. The time I am referring to is the time you see at the bottom of the camera screen when you view it either on the desktop or mobile. And it is on all cameras, so to me it is not just a camera setting.