Of course we've all heard about the mini-ptz's having issues with overheating and such, but haven't really seen much feedback on the Huisun/Imporx speed domes. I know a number of people chose that option along with (or instead of) the mini-ptz. Have there been any failures reported with these or have they been holding up well?
Speed Dome Failure Rate?
- Thread starter wxman
- Start date
Hello, I have a speed dome imporx for 6 months and it works perfectly well, just about concerns of autofocus following the various modes (10 cm, 30cm, 1m, 1,5 m, 3m, 6m, inifini) I have only the 10cm which is perfectly clear.
Others are fuzzy.
Others are fuzzy.
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
If a ptz cannot autofocus properly I would not say its working "pretty well"...Its useless...
nayr
IPCT Contributor
they are too closely priced to Dahua's PTZ's, your money is much better spent on them.. mine's been up for over 2 years and never given me a single problem and is always in focus.
My speed dome is having problems...have had it for 4 mos. The IR lights do not work and the wiper does not move. When manually turning on the IR lights, I hear a click but the lights don't go on. Trying to resolve the problems through Huisun...so far to no avail.
Thanks for the comments. Definitely makes me a little leery.
Unfortunately, this seems to be the only thing I can find in this price range with a wiper. If the Dahua domes in the $400-$600 range had wipers, it would be an obvious choice....but from what I've seen, you have to go well over $1000 with Dahua to get a wiper; Two, to in some cases, over 3 times the price.
Unfortunately, this seems to be the only thing I can find in this price range with a wiper. If the Dahua domes in the $400-$600 range had wipers, it would be an obvious choice....but from what I've seen, you have to go well over $1000 with Dahua to get a wiper; Two, to in some cases, over 3 times the price.
And I bought 2 of these, + duties. I'm starting to think this was a bad buy
Well, are they showing any signs of problems? Not sure how many here purchased these, but so far, only one report here of them breaking. Only time will tell, I guess.
hi , the problem with aufocus is appeared, having to use to ipcdebugger of update tool.
copy of problem:
13:47:59 : Connecting...
13:47:59 : Connect Success.
13:47:59 : Adjust Testing...
13:48:06 : Test Result [Success]
13:48:18 : Begin to infinity curve correction...
13:48:52 : Test Result [Success]
13:49:05 : Start the 1.5M curve correction...
13:49:54 : Infinite minimum bump mechanical end, please exit, and PI detection. [Failed]
13:49:54 : Start the iris automatic correction...
13:50:55 : Net Error! [Failed]
13:50:55 : Adjust Interrupted.
in ipcdebugger.
have you an solution for me ??
lot of thanks
i have always this problem, could you help me ?
copy of problem:
13:47:59 : Connecting...
13:47:59 : Connect Success.
13:47:59 : Adjust Testing...
13:48:06 : Test Result [Success]
13:48:18 : Begin to infinity curve correction...
13:48:52 : Test Result [Success]
13:49:05 : Start the 1.5M curve correction...
13:49:54 : Infinite minimum bump mechanical end, please exit, and PI detection. [Failed]
13:49:54 : Start the iris automatic correction...
13:50:55 : Net Error! [Failed]
13:50:55 : Adjust Interrupted.
in ipcdebugger.
have you an solution for me ??
lot of thanks
i have always this problem, could you help me ?
Last edited: