SmartPSS

[redfive]

Anybody has already tried this version of SmartPSS ?
Cheers,

 

[jmcu]

I have... Some interesting features, not sure if they are new or not because I don't use PSS much except to pull playback from NVR.

Smart track config and the multi track screens

** EDIT- After looking on last version of PSS on my laptop, these features are not new- just undiscovered for me..

The one on dahua wiki has a different file name and date - General_SMARTPSS-FLIR_Win32_ChnEng_IS_V2.002.0000007.0.T.190122 vs

745145_DH_SMARTPSS-Win32_ChnEng_IS_V2.002.0000007.0.R.181023

Template:SmartPSS - Dahua Wiki

 

[looney2ns]

I've tried the same version as @jmcu , some improvements, such as working with the Review-Dahua IPC-HDBW4231F-E2-M Dual Starlight Cam
It finds both channels, where before it would not.

 

[redfive]

IVS settings seems still broken

 

[jmcu]

What is IVS not doing?

 

[redfive]

IVS config directly on the NVR, on the cameras seems ok

 

[redfive]

@jmcu Do you remember this ? I thought that maybe, with the new versions (SmartPSS and NVR fw, 20181229), it had been fixed ..

 

[jmcu]

Yea, that's what I see too. Not able to go through NVR but direct works ok..

I would like to figure out how to change the vertical and horizontal magnification desired on the smart track.

 

[weigle2]

With this version you can backup a file via Playback, to an MP4 file. The problem is I can find no way to use the scissors to cut a small enough clip so that it doesn't error out on the export. Anyone have a solution for this? The only option is a 1 hour clip, to a DAV file. If I could find a good conversion tool to convert a DAV to MP4 that would help tremendously. But most I've tried a pretty suspect, or expensive.

 

[jmcu]

When you use the cut tool you can see the 1hour red flags. You can then slide the right side flag,
( at the end of the hour) and slide it to a shorter time. Then click the cut tool again.. All as mp4

You will have to expand the timeline to get the minute view.

I was able to do a 30 sec clip to 10 mins with nos issues.

 

[weigle2]

When you use the cut tool you can see the 1hour red flags. You can then slide the right side flag,
( at the end of the hour) and slide it to a shorter time. Then click the cut tool again.. All as mp4

You will have to expand the timeline to get the minute view.

I was able to do a 30 sec clip to 10 mins with nos issues.

Thanks! Will try that today. Although to be honest, I have shortened the timeline to less than an hour before, but do not see a red flag to move, on the right. I will give it a go, again. Much appreciated.

 

[jmcu]

If you dont see the red flag on the right, you will have to compress the timeline to see it. It will be at the 1 hr mark.

It is a pain everytime and if you forget, it starts to download the 1hr clip. It has been working for several versions.

 

[weigle2]

If you dont see the red flag on the right, you will have to compress the timeline to see it. It will be at the 1 hr mark.

It is a pain everytime and if you forget, it starts to download the 1hr clip. It has been working for several versions.

Right again. The initial timeline has to be 1 hour or more to see the right flag. That was my problem. Works like a charm. Thanks again.

 

[andrewc1234]

IVS config directly on the NVR, on the cameras seems ok

Do you get push notification from gdmss plus for IVS triggered? It seems to be broken. I can see the log and event from the NVR but not getting the notification sent to my phone.