RevoTech 1706/ Fullhan FH8852 firmware update

S

SSturby

n3wb
Dec 19, 2019
3
1
Alberta
I have a couple of the Revotech Model 1706 POE cameras to monitor a remote shed and they seem to be working fine in BlueIris so far but I did notice that the firmware is old as it is from 2021 as shown below.

Product Info.：FH8852-SW-2053-WB-F3
FW Version：V1.0.0000 - 20210312 20:47:52

I did see that there is an online firmware 'Network Update' but since these cameras are isolated from the internet that is not going to work. :)

I can't find an officially supported firmware download page but I know there must be newer firmware as I found this post where the firmware date is a 2 months newer that what I have for the same product.

B

Thread 'Can't get RevoTech camera working in BI'

I got this POE RevoTech camera: Changed username, password and RTSP port to 554 (was 8554).
I can navigate in Chrome browser to rtsp:/USER_NAME:PASSWORD@192.168.1.xxx:554/profile0 and a stream viewer opens showing me live stream.

Then I try to setup BI with seemingly same settings, I get nothing...
Any help is appreciated.
1681525135560.png
Camera PN: FH8852-SW-2053- WU-F3
Camera FW: V1.0.0014 - 20210517 15:00:00

Thank you,

Boris.

borisw37​

Camera PN: FH8852-SW-2053- WU-F3
Camera FW: V1.0.0014 - 20210517 15:00:00

OpenIPC doesn't support this hardware yet.

Does anyone know where to download the firmware Version File / Update file that the web interface prompts for when choosing 'File Update' method?
 
I have a few of those Revo's which have been working great for years in Blueiris.
I would never take a chance on an update which could render them useless.
 
You must log in or register to reply here.
Top Bottom