Reolink POE DB loses signal

[nickjohn35]

I've had BI since beginning of the year and I'm getting a decent grasp of everything however I noticed my Reolink POE DB (only Reolink camera I have) will occasionally lose signal. Curious if anyone else has had this issue and resolved it? I've attached a screenshot of my camera configuration.

 

[mvoss]

Change your receive buffer to 20.

Michael

 

[VorlonFrog]

is the doorbell in direct sunlight most of the day? It could be overheating.

 

[nickjohn35]

is the doorbell in direct sunlight most of the day? It could be overheating.

No. It might get an hour or so of sun some days. It will lose connection at night too. Not just during the day.

 

[looney2ns]

This can be related to cable issues'.
Make sure you ran pure solid copper ethernet cable, and not CCA cable.
No flat ethernet cables.
The RJ45 connections could need to be recrimped, and make certain they are done properly to 568b standard.
Use Dielectric grease in the Rj45 connection on the camera to prevent corrosion.
You might try a contact cleaner such as Deoxit on the RJ45 connections.

 

[nickjohn35]

This can be related to cable issues'.
Make sure you ran pure solid copper ethernet cable, and not CCA cable.
No flat ethernet cables.
The RJ45 connections could need to be recrimped, and make certain they are done properly to 568b standard.
Use Dielectric grease in the Rj45 connection on the camera to prevent corrosion.
You might try a contact cleaner such as Deoxit on the RJ45 connections.

It is solid core, non flat Ethernet cable. I’ll try some contact cleaner and see if that helps.