Hi all,
When I purchased my current house, it came with an existing installation of Dahua equipment, that one of the previous owner's had installed.
I managed to reset all the passwords, and updated the firmware on the Doorbell (VTH and VTO) along with the NVR.
However, while I did manage to reset the passwords on the cameras, I cannot loctae the correct firmware.
The camera's in question have Dahua branding on both the device and the web interface, and report the following version info:
Device Type: IPC-HDW1631EM
System Version: V2.800.12SD000.0.R, Build Date: 2019-04-24
WEB Version: V3.2.1.709882
I've been able to locate a number firmware files that have naming beginning with "DH_IPC-HX1XXX-" which seems applicable.
But I don't understand if my camera's are Molec, Hertz, or Eos.
So far, trial and error has got me no-where, and I'm worried about bricking the camera this way.
Can anyone help me out to identify the right FW for this camera?
I'm in Australia if that makes any difference. I suspect the cameras are locally sourced based on the company that did the installation (Although they no longer exist)
Thanks in advance for any pointers.
When I purchased my current house, it came with an existing installation of Dahua equipment, that one of the previous owner's had installed.
I managed to reset all the passwords, and updated the firmware on the Doorbell (VTH and VTO) along with the NVR.
However, while I did manage to reset the passwords on the cameras, I cannot loctae the correct firmware.
The camera's in question have Dahua branding on both the device and the web interface, and report the following version info:
Device Type: IPC-HDW1631EM
System Version: V2.800.12SD000.0.R, Build Date: 2019-04-24
WEB Version: V3.2.1.709882
I've been able to locate a number firmware files that have naming beginning with "DH_IPC-HX1XXX-" which seems applicable.
But I don't understand if my camera's are Molec, Hertz, or Eos.
So far, trial and error has got me no-where, and I'm worried about bricking the camera this way.
Can anyone help me out to identify the right FW for this camera?
I'm in Australia if that makes any difference. I suspect the cameras are locally sourced based on the company that did the installation (Although they no longer exist)
Thanks in advance for any pointers.
Last edited: