Possible to have one camera motion trigger but send pic from another cam?

[JT Blue Iris]

Is it possible in BI to have cam 1 get triggered but send pic or clip from cam 2 right after trigger?
If so what is procedure?
Thanks!

 

[DsineR]

Yes - goto the cam settings->Alerts tab->under Actions select 'On alert...'
Here you can specify what to happen on cam alert, including sending pic from another cam.

 

[JT Blue Iris]

Okay thanks, here is what I did and here is what is happening.
I created a camera group and put camera number two (the one I want the image from) in that group then I went to camera one and in its alerts section selected attach current image from that new group. What is happening is that when camera one gets triggered it sends the SMS but It's sending images of all cameras instead of just one. Only camera 2 is in the new group all others are blank.
(Sending an email works correctly however)
What am I missing?

 

[JT Blue Iris]

Correction, it looks like I had selected index instead of the camera group. After changing to the camera crew it now sends the SMS but does not send any images. And I have downscale the size of the image to 10% in case there's a size limitation by the carrier